Evaluation of Near-Field Thermal Environmental Conditions for a Spent Fuel Repository in Tuff
A repository heat transfer analysis is being performed by the Pacific Northwest Laboratory (PNL)a for the U.S. Department of Energy's...

Technical Considerations and Approcah for Evaluating Substantially Complete Containment of High-Level Nuclear Waste
The current Federal Regulations, Title 10 Part 60.113(a)(1)(i)(A) require that, for at least 300 years, nuclear waste containment within a waste package shall be substantially complete....

Permeability and Dispersivity of Variable-Aperture Fracture Systems
A number of recent experiments have pointed out the need of including the effects of aperture variation within each fracture in predicting flow and transport properties of fractured media....

Thermal Stability of Zeolitic Tuff from Yucca Mountain, Nevada
Thermal models of the potential repository at Yucca Mountain, Nevada, suggest that rocks near the potential host rock will experience elevated temperatures for at least 1000 yr. In order...

Optimization Method for Dimensioning a Geological HLW Waste Repository
This method was developed by the CEA to optimize the dimensions of a geological repository by taking account of technical and economic parameters. It involves optimizing radioactive waste...

Evaluation of the Canadian HLW Disposal Program?Performance Assessment Aspects
The inception and development of the Canadian HLW disposal program are described, showing its basis in the multi-barrier system concept and noting the mechanisms in place for its evaluation...

A Demonstration of the Systems Integration Modeling System (SIMS) as a Decision-Support Tool
In April 1989, the Office of Civilian Radioactive Waste Management (OCRWM) Integration Branch completed major demonstration of the Systems Integration Modeling System (SIMS). That system...

Concrete Cask Storage Technology
The paper presents the design and operation of the new dry storage system for nuclear waste. The system was designed by complete nuclear, thermal-hydraulic and structural analysis to the...

Important Factors in Developing a Nuclear Waste Management System
The nuclear waste management system provides unique challenges for a large and diverse segment of our society. For the politician there is the blending of national policy and the interests...

Postclosure Safety Assessment of Radioactive Waste Disposal Systems: Current State of Understanding and International Consensus
Approximately ten years have passed since the first comprehensive safety assessments of radioactive waste disposal systems appeared. Through intensive efforts in practically all countries...

Data Quality Assurance Controls Through the WIPP in Situ Data Acquisition, Analysis, and Management System
Assurance of data quality for the in situ tests fielded at the Waste Isolation Pilot Plant is of critical importance. These tests supply the information for development and verification...

Systems Integration Operations/Logistics Model (SOLMOD)
SOLMOD is a discrete event simulation model written in FORTRAN 77 and operates in a VAX or PC environment. The model emulates the movement and interaction of equipment and radioactive...

A Systems Engineering Cost Analysis Capability for Use in Assessing Nuclear Waste Management System Cost Performance
The System Engineering Cost Analysis (SECA) capability has been developed by the System Integration Branch of the U.S. Department of Energy's Office of Civilian Radioactive...

Method for Determining the Fuel Contribution to the Source Term in Trasnport Casks
A comprehensive source term characterization methodology has been developed for the determination of the fuel contribution to the potentially releasable radioactivity in spent fuel shipping...

Incident Solar Flux at Fixed Orientations
Optimal orientations are computed to maximize or minimize the incident solar flux onto surfaces on spacecraft at fixed attitudes. This analysis was motivated by a potential need to optimize...

Man-Made Debris Environment Characterization for Spacecraft Vulnerability Assessment
An issue of growing importance in the study of orbital debris is the need to understand the consequence of impact on a space structure. In this paper, a technique is developed to analyze...

Effects of Initial Conditions on Large Space Structures
Effects of initial conditions of axial deformation (length) and attitude (pitch) angle have been investigated on the subsequent orbital motion, attitude (librational) motion, and axial...

Actively Controlled Optimum Structural Design
This paper deals with the investigation of the number and location of actuators and sensors on the optimum structure and control design of space structures. The optimization problem is...

Wave Propagation in Hyper-Structures
The concept of hyperelement was introduced by E. Kausel and J.M. Roesset, 1977 in connection with the derivation of the dynamic stiffness matrix for layered continuum problems involving...

The Truss-Beam and Space Technology
A method is presented herein to determine the dynamic characteristics of truss-beam systems for both planar and space structures. Results from this approach are compared with those of...

 

 

 

 

Return to search