Stability of Rock Armour Under Random Wave Attack: Performance of Non-Standard Rock Shapes and Gradings
Quarried rock is frequently used to protect coastal and shoreline structures against wave attack. Armour rock specifications generally exclude rock that is rounded or tabular, and gradings...
RCC for Rehabilitation of Dams in the USA-An Overview
The use of roller-compacted concrete (RCC) has rapidly become a powerful new tool in the USA for engineers involved with the rehabilitation of existing dams. Starting in 1980, RCC has...
Dams Going Safely over the Top
Many older dams can't pass updated design floods without overtopping the embankment crest. Conventional upgrade methods, enlarging spillways or raising crests, are expensive....
Short Beach Nourishment Fill Performance on an Irregular Coatline
A review of the beach nourishment fill performance literature reveals that the accepted and proven theories of beach fill performance can be categorized as either one-line models or analytic...
Gravel Equilibrium Beach Design for Arresting Shore Erosion at Flathead Lake, Montana
Erosion of the north shore of Flathead Lake, Montana, is caused by summer wind waves generated along a 22-mile fetch. The preferred method for arresting erosion there is a beach composed...
Articulating Block Mat Revetment for Whaler's Village
The desire of homeowners to live along the California coastline presents the engineer with many unique design opportunities and constraints. Housing built atop coastal cliffs and bluffs...
Observation of the Post-Construction Performance of a System of Groins along an Eroding Beach
A system of six groins was constructed along an eroding coast of reversing sediment transport. This paper describes the performance of the groin system in terms of the evolution of the...
Comparison of Model and Field Results for Barbers Point Harbor
As waves travel into harbors from deep water, nonlinear processes lead to transfers of energy from the wind wave frequencies to long waves with periods of the order of several minutes....
Numerical Modeling of Proposed Kawaihae Harbor, HI
The Kawaihae shallow-draft harbor site is located on the northwest coast of the island of Hawaii, HI. An entrance channel, turning basin, and breakwater currently exist at the harbor site....
Inner Harbor Wave Conditions due to Breakwater Overtopping
The results of this study have important application to the design of small boat marinas protected from incident waves by breakwaters that may be overtopped during extreme wave events....
Wave Barriers: An Environmentally Benign Alternative
This paper describes the history and development of the environmental wave barrier and the current planning and design being undertaken for a major expansion of the small boat harbor at...
Design, Construction, and Performance of a Baffled Breakwater
The Spud Point Marina breakwater is located within Bodega Harbor, a protected embayment on the northern California coast. Waves are attenuated by baffle panels hung between support piles....
Longshore Sediment Transport Rate at Morro Bay, CA
Estimates of sediment transport rate in the vicinity of Morro Bay Harbor are needed as part of an investigation of possible modifications to the existing Federal project. Because the site...
Wave Forecasting for Construction in Mobile Bay
Wave heights were forecast for day-to-day pipeline construction operations in the Main Pass area of Mobile Bay. A low-cost forecasting procedure was developed using the wave generation...
The Talbert Channel Ocean Outlet Project
The Talbert Channel Ocean Outlet Project consisted of relocating and enlarging the outlet of a relatively narrow, shallow flood control channel in Southern California. Noteworthy aspects...
Construction on Wisconsin's Lake Michigan Coast
This paper provides a preliminary evaluation of a set of 100 residential properties along Wisconsin's Lake Michigan coast; an examination of the vulnerability of coastal homes and adequacy...
Dutch Experience on Design of Dikes and Revetments
The increased demand for reliable design methods for protecting structures has resulted in The Netherlands in preparing a set of design guidelines for design of dikes and revetments. The...
Development of Detached Breakwater Design Criteria Using a Shoreline Response Model
An evaluation of beach response to detached breakwaters was conducted using the numerical shoreline response model GENESIS. Functional design parameters such as structure length, gap distance,...
Robust Approach to Wave Runup Calculation
Wind wave runup on a natural beach is examined for the case of an irregular wave forcing function. A pragmatic approach to the calculation of the runup time series and the corresponding...
Remote Automated Wave and Water Level Monitoring System Deployed at Agat Harbor, Guam
Agat Harbor, Guam is a small boat harbor excavated from a coral reef flat and protected by a detached breakwater. An automated monitoring system was designed and installed to observe wave...
Return to search