Channel Restoration of Incising, Mixed Grain Size Streams: Lessons Learned
Aquatic habitat restoration in incising sand and gravel bed streams disturbed by channelization and other human interventions has received little study. These channel systems are characterized...
Mitigation Measures for Eroding Muddy Shores
A criterion for the stability of muddy coasts is proposed, accounting for bottom resistance, hydrodynarnic forcing and sediment supply. Although qualitative, this criterion provides a...
A Three Dimensional Oil Spill Model
This paper reports the development and testing of a comprehensive three-dimensional oil spill model. At present time, the model components include advection and turbulent diffusion, vertical...
On Silt Abrasion Erosion of Three Gorges Hydraulic Turbine in the Future
In this paper the basic parameters of Three Gorges hydraulic turbine have been reviewed and the operation characteristics of Three Gorges hydropower Station pointed out. Combined with...
Scour Protection in Bottomless Culverts
This paper will describe the relative severity of scour anticipated to occur at bottomless culverts and will provide some design guidance for scour protection based on research referenced...
Designing Concrete Culverts to Resist Scour Damage
Concrete culverts have been used for over 100 years. In this period, the main design concern centered on structural and hydraulic adequacy of the culvert. Scour is a relatively recent...
The Use of Hydrologic Budget Techniques in Assessing Site Suitability for Wetland Creation
This paper discusses the general concepts and benefits of using of hydrologic budget techniques to describe the typical hydrologic conditions that might be expected at prospective site...
Laboratory Evaluation of a Conductivity Probe for Scour Monitoring
Laboratory tests were used to evaluate the ability of conductivity sensors to measure streambed elevation. Tests were completed on a 2.1-m probe with a resolution of about 8 cm that was...
Adhesion Kinetics of Fuel Oil #6 and Oil-in-Water Emulsions on Marine Sediments under Turbulent Mixing Conditions
Oil spilled in the marine environment is subject to a great variety of physical, chemical and biological processes, which determine its ultimate fate in the aquatic environment. Many of...
Tensioned Fabric Structures
A Practical Introduction
The objective of this publication is to provide basic information about the nature and characteristics of tensioned fabric structures. Its target audience includes architects, engineers,...
When Toxics Meet Metal
Zero-valent iron is an emerging remediation technology that transforms chlorinated solvents to harmless substances. Engineers and researchers have been studying the process for about five...
Building an International Community of Structural Engineers
This proceedings, composed of two volumes, contains the papers presented at the American Society of Civil Engineers (ASCE) Fourteenth Structures Congress held in Chicago, Illinois, USA,...
Building Code Requirements for Masonry Structures (ACI 530-95/ ASCE 5-95/TMS 402-95); Specification for Masonry Structures (ACI 530.1-95/ ASCE 6-95/TMS 602-95); Commentary on Building Code Requirements for Masonry Structures (ACI 530-95/ ASCE 5-95/TMS 402-95); Commentary on Specification for Masonry Structures (ACI 530.1-95/ ASCE 6-95/TMS 602-95)
Copublished with American Concrete Institute (ACI) and The Masonry Society (TMS)
Engineering Mechanics
This proceedings contains keynote and summary papers presented at the 11th ASCE Engineering Mechanics Conference held in Fort Lauderdale, Florida, May 20-22, 1996. The keynote papers address...
Scour Power
New prediction methods consistently calculate scour around bridge piers allowing engineers to better tailor pier design in rock and consolidated material. The leading cause of bridge failure...
Pipeline Crossings 1996
This proceedings,
Engineering and Construction for Sustainable Development in the 21st Century
Assessing Global Research Needs
Prepared by the Civil Engineering Research Foundation. This report identifies key engineering research and construction issues for the 21st century...
Advanced Composites Build on Success
Advanced composite materials are competing with conventional structural materials thanks to the ready availability of glass, aramid and carbon fibers, epoxies, vinylesters, polyesters...
Uncertainty in the Geologic Environment
from Theory to Practice
The state-of-the-art is presented with respect to analytical and design methods incorporating uncertainty in the geologic environment. Particular emphasis is placed on practical applications...
Cold Regions Engineering
The Cold Regions Infrastructure?An International Imperative for the 21st Century
This volume includes papers presented at the Eighth International Conference on Cold Regions Engineering?The Cold Regions Infrastructure: An International Imperative for the 21st Century....
Return to search