Application of a Beach Plan Evolution Model in Sergipe, Brazil
An offshore breakwater 543 m long located at about 2.4 km from the shore at 10 m of water depth (above chart datums) provides protection to a liquid bulk terminal (Terminal Portuarlo de...
Design of Protective Dunes at Dam Neck, Virginia
Dunes act as a primary coastal defense against inundation in the Netherlands and the Dutch Government has devoted considerable effort towards development of reliable procedures for the...
Articulating Block Mat Revetment for Whaler's Village
The desire of homeowners to live along the California coastline presents the engineer with many unique design opportunities and constraints. Housing built atop coastal cliffs and bluffs...
Coastal Processes and Engineering on a Micronesian Fringing Reef
In 1980, portions of the fringing reef flat protecting the village of Tafunsak, Federated States of Micronesia, were dredged to provide fill material for an airport runway access road....
Observation of the Post-Construction Performance of a System of Groins along an Eroding Beach
A system of six groins was constructed along an eroding coast of reversing sediment transport. This paper describes the performance of the groin system in terms of the evolution of the...
Laupahoehoe Harbor Planning, Design, & Construction
Laupahoehoe Harbor provides access to the fertile fishing grounds along the northeast or Hamakua coast of the island of Hawaii, Hawaii. The planning, design, and construction of Laupahoehoe...
Harbour Development in Southern Part of Thailand
Fishery ports located along the river mouthes in southern part of Thailand were developed by improving their navigation channel to provide acessibility of fishery boats to travel all year....
Inner Harbor Wave Conditions due to Breakwater Overtopping
The results of this study have important application to the design of small boat marinas protected from incident waves by breakwaters that may be overtopped during extreme wave events....
Wave Barriers: An Environmentally Benign Alternative
This paper describes the history and development of the environmental wave barrier and the current planning and design being undertaken for a major expansion of the small boat harbor at...
Design, Construction, and Performance of a Baffled Breakwater
The Spud Point Marina breakwater is located within Bodega Harbor, a protected embayment on the northern California coast. Waves are attenuated by baffle panels hung between support piles....
An Engineering Assessment of Hydrodynamics and Beach Response at Little River Inlet, NC-SC
The Waterways Experiment Station's (WES) Coastal Engineering Research Center (CERC) conducted an analysis for the U.S. Army Engineer District, Charleston (SAC) of the monitoring data collected...
Design and Construction of Shinnecock Inlet, New York
Shinnecock Inlet is the easternmost of six coastal inlet which bracket the barrier island on the south shore of Long Island, New York. Through recent history, Shinnecock Inlet has exhibited...
Scour Hole Development and Stabilization at Shinnecock and Moriches Inlets, New York
A scour hole developed inside the Shinnecock Inlet channel near the tip of the west jetty. Over the years, this hole deepened to about 70 ft below the mean low water level with the average...
South Jetty Scour Hole Stabilization, Ocean City, Maryland
Formation of a scour hole along the inlet side of the South Jetty at Ocean City occurred after jetty construction as a result of ebb tidal flow in the inlet. Analysis of historical bathymetry...
Alternative Study for the Breakwater and Fishing Pier Rehabilitation at Playland Park, Rye, New York
An alternative study was conducted to determine that existing condition of a deteriorated timber pier and a rubblemound breakwater, and to develop alternative rehabilitation plans leading...
Sylvan Beach Pier Rehabilitation Study
The Sylvan Beach Pier is a navigation guide jetty located at the east and of Oneida Lake in Oneida County, New York. It protects the entrance to the New York State Barge Canal which crosses...
Design of a Mechanical Refuse Barrier
In the summer of 1988, beachgoers flocking to the New Jersey shore for relief from unusually hot, hurried weather were stunned by the grisly spectacle of hospital debris, industrial and...
Development of Detached Breakwater Design Criteria Using a Shoreline Response Model
An evaluation of beach response to detached breakwaters was conducted using the numerical shoreline response model GENESIS. Functional design parameters such as structure length, gap distance,...
Application of a Dolos Structural Design Procedure
Dolos concrete armor units are widely used to protect coastal structures. New developments in armor unit strength design permit the armor unit designer to optimize the dolos parameters...
Concrete for Sealing Voids in Rubble Structures
Permeability of rubble-mound breakwaters and jetties to sand transport and wave transmission results in increased costs for dredging and navigation. Guidance is provided for economically...
Return to search