Verification of NESSUS Code on Space Propulsion Components
Application of probabilistic finite element method to the structural analysis of typical space propulsion components such as turbine blades and high pressure ducts is reported. The study...
A Supertrain Solution?
A high speed steel wheel rail line has been highly successful in France, where ridership has been very high. Financial backers were paid back in seven years, half the projected payback...
Unlocking Arena Gridlock
The Charlotte Coliseum features a $22 million reversible lane system, which provides easier access to and from 8,000 parking spaces. To improve access to the arena, a 3.6 mi road extension...
Industrial Strength 3-D
Williams assesses the benefits of using three-dimensional computer modeling in the design of industrial structures, comparing the reality in which the computer is a useful tool for engineers...
Pilot Bore Pays Off
The primary purpose of tunneling through Cumberland Mountain is to ease the 18,000 vehicle per day traffic through the rugged terrain that was a major transportation route when Daniel...
Earth Pressure Acting on Buried Flexible Pipes in Centrifuged Models
Distributions of both normal and tangential earth pressures acting on three flexible model pipes having different wall thicknesses were successfully measured in centrifuge model tests....
Column Separation in Pumped Pipelines
Pressure transients are common occurrences in water supply systems. Pipeline standards and design/testing techniques will normally provide sufficient protection for transmission and distribution...
Pipeline Leak Detection and Location
A real time pipeline leak detection and location system has been developed. This system consists of a numerical model for transient flow, two sets of pressure and flow measurement equipment,...
Valve Control to Avoid Column Separation in a Pipe
Maximum pressures in a pipeline can be reduced significantly by closing the valve in an optimal manner. Such an optimal valve closure policy may result in some situations in minimum pressures...
FE Elastic Analysis of Measured Earth Pressure on Buried Rigid Pipes in Centrifuged Models
FE elastic analyses of earth pressure on buried rigid pipes yielded results that agreed well with the earth pressure measured in 42 centrifuged models, confirming both the reliability...
The Effect of Compaction on Buried Flexible Pipes
This contribution presents an analysis of the installation of flexible pipes in granular soil. The deformation of the pipe cross section is measured in field and laboratory tests. It is...
Kinematic Models of Extensional Structures: Seismic Implications
Kinematic models can relate faults of different types and different positions within a single dynamic system and thereby offer the potential to explain the disparate seismic activity characteristic...
Iodine Transport Through the Soil-Plant-Atmosphere Continuum
The environmental assessment of the geological disposal of Canadian nuclear fuel waste involves transport modelling of radionuclides through the biosphere. Iodine-129 is a major fission...
Simulation of Reactive Chemical Transport in a Varying Thermal Field with Reaction-Flow Coupling
A computer program, THCVP, simulates coupling between advective/diffusive solute transport and chemical reactions, coupling of the reactions to heat transport, and feedback from precipitation/dissolution...
Simulation of Radionuclide Retardation at Yucca Mountain Using a Stochastic Mineralogical/Geochemical Model
This paper presents preliminary transport calculations for radionuclide movement at Yucca Mountain using preliminary data for retardation parameter distributions based on mineral distributions....
Optimal Route Selection for High Level Nuclear Waste Transport Based Upon Radiological Risk
The purpose of this paper is to demonstrate route optimization based directly upon the minimization of radiological risk as computed from local conditions. An operational impact analysis...
Outline of Performance Assessment Study on Geological Isolation System in Japan
The goals of current R&D activities are to ensure the feasibility of geological isolation of HLW in Japan and then to establish the social acceptance. In order to attain these...
Evaluation of Near-Field Thermal Environmental Conditions for a Spent Fuel Repository in Tuff
A repository heat transfer analysis is being performed by the Pacific Northwest Laboratory (PNL)a for the U.S. Department of Energy's...
A Numerical Study of Some Effects of Nuclear Fuel Waste Vault Construction and Closure on Evolution of Groundwater Flow Paths in the Geosphere
We have performed a series of three dimensional finite-element simulations on the sensitivity of the groundwater flow paths and travel times in a conceptual hydrogeological model with...
Three-Dimensional Plume Dynamics in the Vadose Zone: PORFLO-3 Modeling of a Defense Waste Leak at Hanford
In 1973, approximately 450 m3 of liquid containing radioactive and chemical wastes leaked from the 241-T-106 single-shell tank into the vadose zone...
Return to search