Effects of Freezing on Impact Properties of RTM Composites, and Their Applications in Offshore Structures
Resin transfer molding is rapidly being acknowledged as the process with potential to create perhaps the purest form of a composite material as representative of the concept of `material-by-design.'...
Mobile-Bed Physical Model Tests for the 1992 Olympic Harbour
The undistorted physical model is described which allowed the measurement of the wave induced velocity field along the main breakwater, and also in Somorrostro Beach (Barcelona). The current...
Dynamic Design of Deepwater Bottom-Founded Towers
This paper traces the development of dynamic design techniques for deepwater bottom-founded towers by the following: the classification of bottom-founded towers as either `stiff' or `compliant';...
Dynamic Response Characteristics of Jack-Up Drilling Units
The effects of five parameters on the dynamic amplification of the global base shear on a deep water jack-up drilling unit were analyzed using a time domain nonlinear model. The five parameters...
Response Statistics of Tension Leg Platforms Under Wind Loads
This paper presents the direct integration method and Kac-Siegert technique to solve the first four cumulants in the general quadratic systems, and proposes the splitting technique to...
Advanced Structures in Very Deep Water
Factors which are largely economic will lead to the requirement to design and deploy small numbers of large platforms and large numbers of small platforms in water depths of up to 4 km...
Composites for Offshore Applications: A Multidisciplinary Education Program for the Marine Industry
Composites are increasingly being considered for offshore and other marine structural applications. Polymeric matrix composites reinforced with glass, carbon, and aramids offer substantial...
Internationalization of Engineering Professions
The most salient features impacting the development of our deepwater frontier areas are considered. The areas of higher potential for deepwater reserves are identified. The integrated...
Old Problems and New Challenges in Marine Geotechnical Engineering
The discipline of marine geotechnical engineering originated nearly five decades ago, primarily as a result of the offshore oil and gas industry. As this industry moved into deeper waters,...
Wastewater under Home Plate
A short, highly sloped piping system and peak flows at the start and end of the day were causing the wastewater treatment plant in Daly City, Calif., to frequently exceed its permit for...
RCC at 10
Tens years after the first roller-compacted concrete (RCC) dam in the U.S.�the 169 ft high Willow Creek Dam in Oregon�was completed, the method has gained wide acceptance around the world...
Smart Structures
Detecting cracks in concrete before they become visible could help prevent structural collapse of buildings and other civil works, say professors at three schools of engineering. The University...
Measured to the Max
Engineers looking to model the behavior of a structure under seismic conditions often ignore the best source of data available: the building itself. Full-scale measurements of vibrations...
Instrumenting the `Y'
Segmental bridges are still relatively new to the U.S. and questions persist about their design and behavior. To expand the knowledge base, a number of laboratory and field studies have...
Tensile Terminal
Few can miss a fabric roof that covers a 1.45 million sq ft area. The one covering the Denver International Airport's Landside Terminal complex (reportedly the nation's...
Seismic Assessment of Tailings Dams
A significant portion of the operating and closed large dams in North America are tailings dams used to impound wastes from mining operations. Often these dams were built by mine personnel...
Tying Back a Landslide
A slope covered with landslide debris is never the most desirable site on which to build, but sometimes it is the only one available. For the Forks of Butte hydroelectric power project,...
Manholes and Microtunneling
Contractors are for the Oakwood Beach Interceptor Sewer Project, on Staten Island, N.Y., were having difficulty. Glacial tills and a high water table made working 90 ft below the ground...
Put to the Test
In the construction industry, the concept of life-cycle cost applies not only to the infrastructure itself, but to the materials that go in to building that infrastructure. To improve...
Settling Down Easy
In order to more fully participate in the international and Asian Pacific aviation network, it was decided to establish a highly efficient 24-hour a day operation at the New Kansai International...
Return to search