Overview of Permeable Bases
Drainable pavement systems consist of: permeable base, separator lyer, and edgegrain system. This paper focuses on permable bases. A permeable base must provide both permeability and stability....

Performance of Epoxy-Coated Steel in Continuously Reinforced Concrete Pavement
Two sections of interstate highway in central Oklahoma were recently reconstructed. On both projects, northbound lanes were reinforced with epoxy-coated steel and southbound lanes were...

Design and Construction of a Bonded Fiber Concrete Overlay of CRCP (Louisiana, Interstate Route 10, August 1990)
The purpose of this study was the design and construction of a bonded steel fiber reinforced concrete overlay on an existing 8-inch CRC pavement on Interstate 10 south of Baton Rouge,...

High Strength, Low Permeability Garage Rehab Concrete
Physical and engineering properties of high strength structural lightweight concrete used to replace deteriorated concrete in garage structure rehabilitation programs are reported. Structurally...

Properties of Composites Using Recycled Plastics
Recycled poly(ethylene terephthalate), PET, mainly recovered from used plastic beverage bottles, can be used to produce unsaturated polyester resins. Polymer concrete (PC) and polymer...

Concreting at Subfreezing Temperatures
Temperature affects the rate at which portland cement concrete develops strength. Below about 20?C, strength gain is retarded, whereas at higher temperatures it is accelerated. Strength...

Forensic Analysis Techniques for Joint Sealants
Growing concerns involving the field performance of pavement joint sealant materials has illustrated the need for forensic capabilities in determining the cause of sealant failures. Methods...

Performance of Recycled Asphalt Concrete Materials in an Arid Climate
Recycling of asphalt concrete pavement is a common practice for highway agencies. In 1981, the Arizona Department of Transportation (ADOT) constructed eight test sections in on experimental...

Reliability-Based Design for Feeeze-Thaw Concrete
Observation of pavements in Iowa shows results from the test for freezing and thawing of concrete, ASTM C-666, is not always consistent with field performance. Similar concrete made with...

Concrete Surface Treatments?A Selection Guide
Concrete deterioration can take many forms. The most common forms of concrete surface deterioration includes delaminations, spalling and scaling. This deterioration is usually caused by...

Rehabilitation of Chloride Damaged Concrete
There are several methods of rehabilitating structural concrete that must deal with the presence of chlorides. It is critical that the rehabilitation designer recognize the abilities of...

A Theoretical Approach to Characterize Reinforced Concrete Using Stress Waves
Although advances in nondestructive evaluation of structural concrete have been made, the ultrasonic determination of the placement of steel reinforcement in concrete remains difficult....

Investigation of Concrete at a Middle East Plant
In recent years, reinforced concrete construction in the Middle East has been beset by durability problems. The causes include availability of a limited number of skilled workers, marginal...

Innovations for NDT of Concrete Structures
The proposed paper presents three recent innovations for sonic and ultrasonic Non-Destructive Testing (NDT) of concrete structures which greatly increase the utility and speed of many...

Unidirected Twined-Strand Composites and Their Uses
Twined strand composites are a new class of unidirected continuous-fiber-reinforced composite materials where the orientation of the continuous fibers is a twine of unidirected helically...

Adhesives and Structural Plastics
An overview of some primary considerations for the use of adhesives and their advantages in connection of structural plastics is presented. Effective joint geometries, surface preparations,...

Full Scale Tests on Concentrically Loaded Fiber-Reinforced Pultruded Columns
This paper briefly reports on the experimental investigation in connection with the short term behavior of pultruded structural members under concentric loading. In particular, results...

Bond Strength of Straight GFRP Rebars
An overview of a study on bond of straight Glass-fiber-reinforced-plastic (GFRP) rebars to concrete is presented. The 54 specimens to be tested include several variables, such as the mode...

Glass-Fiber Reinforcing Rod: Characterization and Application to Concrete Structures and Grouted Anchors
This paper presents the physical and mechanical characteristics of a new glass-fiber reinforcing rod which was developed to be used as a rebar for concrete structures or a tendon for grouted...

Tests of Full-Size Pultruded FRP Grating Reinforced Concrete Bridge Decks
Results of tests of full-size concrete bridge deck slabs reinforced with commercially produced pultruded fiber-reinforced plastic (FRP) gratings are presented. The slabs were designed...

 

 

 

 

Return to search