ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

A Hybrid Model for Sediment Concentration Profiles
The paper discusses the deficiency in the existing theories on suspended concentration profiles which is due to the variations of theories for modeling the velocity profiles. As can be...

Experimental and Numerical Study of Overland Flow Induced by Rainfall on the Loess Slope
Based on the repeated experiments of overlad flow on the Loess slope under the condition of constant and variable artificial rainfall intensity in laboratory, the mathematical model corresponding...

Synthetic Calibration of a Rainfall-Runoff Model
A method for synthetically calibrating storm-mode parameters for the U.S. Geological Survey's Precipitation-Runoff Modeling System is described. Synthetic calibration is accomplished...

Failure Modeling of Hydraulic Systems
Techniques of survival analysis are investigated for modeling the failure of hydraulic systems. The Proportional Hazards Model has the advantage of being able to separate the effects on...

Optimal Design of Highway Drainage Structures
Hydraulic design of a bridge or culvert using a risk-based approach is to choose among the alternatives the one associated with the least total expected cost. In this paper, the risk-based...

Modeling a Large, Dynamic, Urban Drainage System
Impacts of progressive urbanization on peak streamflow are often difficult to quantify due to the dynamic, but subtle changes from year-to-year. In this instance urbanization impacts are...

Uncertainty Estimates for Rainfall-Runoff Model
Almost all rainfall-runoff link-node models in use today involve the subdivision of the catchment into smaller areas, linked together by a system of channel links. These 'link-node'...

Bootstrapping Nonlinear Storm Event Models
A bootstrap method for estimating the parameters of nonlinear storm event models is presented. The method pools (combines) the parameter estimates obtained from fitting computed and observed...

Innovative Spillway Design
The Lake Alan Henry Dam, near Lubbock, Texas, will consist of an earth filled embankment, a service spillway and an emergency spillway. The service spillway is designed to handle flows...

Scale Effects of Overflow-Oriented Hydraulic Parameters for a High Dam
This paper presents the findings of prototype observation and model verification on the surface velocity, the range of nappe jetting, and the diffusion regime of the discharged flow related...

Operational Model Development for Salinity Control
The 800 km² Breton Sound estuary and watershed in Louisiana is being modeled to characterize its salinity regime in terms of hydrometeorological...

Application of the Generalized Channel Routing Model
Using the linear full dynamic finite difference model the applicability of diffusion and kinematic wave models is investigated. Two dimensionless numbers are suggested for applicable range...

Kinematic Wave Based Hydrologic Models with Different Solution Methods
The hydrologic simulation models RUNOFF and HEC-1 are applied to a 3212-ha watershed in New Jersey, and performances of the two models in predicting historical stromwater hydrographs from...

Integration of GIS, Remote Sensing, and Digital Elevation Data for a Hydrologic Model
The Agricultural Nonpoint Source Pollution Model (AGNPS), which was developed by Agricultural Research Service, was used as a test model for assessing nonpoint source pollution. The model...

A Regionalized Rainfall-Runoff Stochastic Model
The single area unit hydrograph model is used to develop a distribution model which accommodates the uncertainty in rainfall over the catchment. By categorizing the available rainfall...

Status and New Capabilities of Computer Program HEC-6: Scour and Deposition in Rivers and Reservoirs
Last year the Hydrologic Engineering Center (HEC) and the Waterways Experiment Center (WES) incorporated the results from more than ten years of research and development into a new version...

Application of the Ackers-White Procedure for Transport by Size Fractions and Testing in HEC-6
Modification of the Ackers-White method for the calculation of sediment transport by size fractions has led to a procedure which not only permits such calculations, but also increases...

Numerical Modeling of a Trench Fill and Scour
The sediment fill and scour in a dredged trench was numerically simulated by the nodal-collocation finite element method and an explicit scheme. The one-dimensional unsteady sediment-laden...

Computational Open-Channel Hydraulics for Movable-Bed Problems
As a major branch of computational hydraulics, notable advances have been made in numerical modeling of unsteady open-channel flow since the beginning of the computer age. According to...

A Generalized Diffusion Wave Flood Routing Model
A generalized diffusion wave model for flood routing is presented. The model can incorporate detailed data on natural cross sections and river bed geometry. An accurate numerical method...

 

 

 

 

Return to search