Development of a Limit-State Seismic Code for Bridges
The catastrophic collapse of the Cypress Street Viaduct during the Loma Prieta earthquake of October 17, 1989 and the loss of spans in both the Struve Slough Bridge and the San Francisco-Oakland...
Reliability Model for Bridge Columns under Seismic Loads
This paper develops a model for the analysis of the reliability of bridge columns under earthquake loads. Probability of failure is defined as the probability that the displacement ductility...
Seismic Rehabilitation of Seattle's Pier 69
The Port of Seattle, one of the largest on the west coast of North America, made a strong statement regarding their support for reusing existing structures when a decision was made to...
Masonry as a Structural Material
Four case studies are presented which illustrate the use of masonry as a structural material. Results of laboratory studies for unreinforced piers subjected to in-plane lateral forces,...
A Mechanistic Approach to Pavement Design for Nome Airport
The analysis of performance and design of the pavement structure for the North-South runway at Nome Airport is based on the mechanistic approach. In the mechanistic approach, calculated...
Improved Corrosion Protection for Flue Gas Systems Utilizing a Dual Liner Concept
A unique system of corrosion resistant materials has shown excellent performance and durability in flue gas systems for fossil plants, cogeneration plants, waste incinerators and waste-to-energy...
Approximate Preliminary Methods for Design of Lateral Load Resisting Systems in High Rise Buildings
A new group of optimization programs uses the speed and power of modern computers to eliminate the need for guessing preliminary sizes. Starting with any arbitrary sizes and a fixed geometry,...
Multiple Event Considerations for Postclosure Seismic Hazard Evaluations at Yucca Mountain, Nevada
Postclosure waste canister design requirements suggest the values used for seismic design have less than a 10% chance of being exceeded in a 1,000 year postclosure period. Considerably...
Potential Uses of Lead in Nuclear Waste Disposal
In order for lead to be considered as a nuclear waste packaging material, it must be shown that it has adequate corrosion resistance, and that it does not degrade the properties of other...
Accurate Response Analysis of Seismic Distributed Mass Systems
A dynamic analysis technique of distributed mass structures is presented with a combination of the dynamic load factor approach and the dynamic stiffness matrix method. The dynamic stiffness...
An Electronic Specification for the Earthquake Resistance Design of the Highway Bridges in Pennsylvania
An interactive C program for the seismic design of highway bridges in the state of Pennsylvania is described in this paper. The program was developed in C language on a personal computer....
Computer Implementation of Seismic Building Codes
The objective of this work is to implement the provisions of building codes current in the U.S. as well as those of other countries for the seismic resistant design of buildings. The work...
Macro-Model for Inelastic Low-Rise R.C. Shear Walls
This paper presents an analytical technique for calculating static and seismic response of low-rise shear wall structures. The displacement response is resulting from bending, shear, and...
Stiffness Optimization Methods for Lateral Systems of Buildings: A Theoretical Basis
The sizing of the members of the lateral resistance system for multi-story buildings is often controlled by stiffness requirements. In order to achieve economical buildings, it is important...
System Identification Techniques for Inelastic Structures
A classical optimization algorithm is used to identify the parameters of a smooth hysteretic restoring force model, which can be used to describe the inelastic behavior of structures under...
Risk Perception and Policy Preferences of Fire Chiefs: A Survey of Hazardous Materials Issues
This paper presents the results of a survey of Connecticut fire chiefs and discusses how their perceptions of risk affect their attitudes towards risk preparedness and risk management...
Watertight and Earthquake Resistant Joints for Diaphragm Walls
Different types of joints were constructed and tested in the field to evaluate the bond between concrete and partition plate, the effect of tremie pipe location to the quality of concrete...
Surviving the Storm: Building Codes and the Reduction of Hurricane Damage
The link between adequate building codes, enforcement, and the level of damage experienced in major hurricanes was examined in a 1989 study by AIRAC, a public policy research group sponsored...
Radical Environmentalism, The New Approach: The Removal of Oil as a Primary Goal of Oil Spill Clean Up
In this paper the author examines the alternative methods of abating a catastrophic oil spill and compares these methods to the controlled burning of an oil spill using a fire-resistant...
Coastal Management's Role in Seismic Safety?Political Lessons from California's 1989 Loma Prieta Earthquake
The San Francisco Bay Conservation and Development Commission (BCDC) -- the first coastal management agency in the United States --has been involved in seismic safety since the Commission...
Return to search