Steel Exoskeleton Defines Architecture
The Hotel de las Artes multi-use complex in Barcelona, Spain consists of a luxury hotel/apartment tower, a commercial office building, retail, parking and other amenities. The most prominent...
Nondestructive Testing Role in Repair and Rehabilitation of Concrete Structures
Nondestructive testing (NDT) methods are increasingly being used to assess the condition of structural concrete. The paper discusses applications of NDT methods for forensic investigation...
Assessment and Repair of Fire-Damaged Concrete Structures
Concrete, even though it may be the most fire-resistant of all the major building materials, can be damaged by fire. Seldom does even a major fire cause total destruction, however, most...
Evaluation and Repair of Unbonded Post-Tensioned Concrete Structures
As with other forms of infrastructure, there is an ever increasing need to repair and strengthen unbonded post-tensioned concrete structures. Repairs may be necessitated for a variety...
Use of CLSM Fly Ash Slurry for Underground Facilities
This paper presents the results of research performed in developing and using flowable fly ash slurry which falls under the classification of Controlled Low Strength Material (CLSM) as...
Digital Image Processing and Analysis in Materials Science (Keynote Lecture)
This discussion presents a generic overview of computer aided imaging in materials science. Some of the questions to be answered are: Does the computer perceive the same things that I...
Multispectral/Hyperspectral Imaging and Data Compression
Remote sensing instrumentation, data and analysis techniques for Civil Engineering applications are similar to those used in multidisciplinary remote sensing of the earth's surface. Data...
Morphological Methods for Characterizing Inter-feature Distances
Characterizing inter-feature distances in digital images using automatic image analysis systems presents problems not found when quantifying the morphology of the features themselves....
Image Analysis of Clay Microstructure
The paper summarises new methods which have been developed to analyse oriented textures in electron micrographs of clay soils, complementary methods using polarising microscopy, and an...
Application of Digital Image Processing in Morphological Analysis of Geotextiles
Geotextile filters are rapidly replacing graded granular filters in dams, landfills, edge drains, and retaining walls. The design of these filters requires morphological information about...
A Chemical Image Analysis Procedure as a Method for a Quantitative Modal Analysis of Clinker Minerals
In a chemical image analysis procedure, the specimen is analyzed in a scanning electron microscope in backscatter mode, thus providing an atomic number contrast. The phases are segmented...
Radiographic Visualization in Experimental Soil Mechanics
A summary of the principles of such methods is presented, i.e. stereophotogrammetry, infrared thermography and radiography and their respective ranges of applicability are discussed. Then,...
Application of Radar Imaging Techniques to Concrete
Wideband radar imaging techniques have the potential of being a powerful tool in detecting steel reinforcing bars and delaminations inside concrete. The success of the method as a nondestructive...
Interactive Digital Image Feature Analysis as Applied to Cement and Concrete Microstructural Investigations
A novel procedure involves interactive chemical image analysis of separable features in the backscattered image. In this procedure a backscatter image is acquired by the image analysis...
Digital Image Techniques for Volume Change Measurements in Triaxial Tests
This paper presents an innovative technique that has been used for measuring the volumetric deformation that cylindrical specimens experience during the shearing stages of a triaxial test....
Image Analysis for Interparticle Contact Modeling
Two dimensional photoelastic elements (disks or ellipses) are used as models for studying granular material behavior. The required observations include accurate continuous measurements...
Displacements in the Soil Near a Tunnel Face Using Centrifuge Tests and Image Processing
Image processing is applied to measurements of the soil for a tunnel model in centrifuge. For this aim a specifical device has been developed on the LCPC centrifuge (Nantes, France) and...
Image Analysis Applied to Geotechnical Engineering
Application of scanning electron microscope and image analyzer to the quantification of grain morphology and microfabric of aged sands is briefly reviewed. Relationships of morphology...
Mechanistic Design Models of Loading and Curling in Concrete Pavements
Determination of the critical bending stress at the edge of a concrete pavement due to individual and combination effects of wheel loading and thermal curling is very crucial to any mechanistic...
Finite Element Analysis of Slabs-on-Grade Using Higher Order Subgrade Soil Models
Incorporation of the two-parameter, Kerr and Zhemochkin-Sinitsyn-Shtaerman subgrade models into finite element code ILLI-SLAB is described. The two conventional idealizations, namely the...
Return to search