Determination of Diffusivities of Sorbing and Nonsorbing Species in Rocks
Through-diffusion experiments were performed for the sorbing and nonsorbing species in granites. Determining methods of diffusivities were discussed according to sorption properties of...
Design Control Process Requirements for Geologic Repository Operations Area Design
This paper outlines U.S. Nuclear Regulatory Commission's (NRC's) key regulations applicable to U.S. Department of Energy's (DOE's) design...
Design Control Overview fot the Yucca Mountain Site Characterization Project Exploratory Shaft Facility
This paper presents an overview of the design control process used for the Exploratory Shaft Facility (ESF) at Yucca Mountain. Design and design control is a complex, often iterative,...
Performance Assessment in Early Phases of the Repository Design Process
Assessments of post-closure performance are an integral part of the design process for a repository for high-level nuclear waste. They provide input to the establishment of design requirements...
Design Considerations for the Yucca Mountain Project Site Characterization
The Site Characterization Facilities (SCF) to be located in volcanic tuff at Yucca Mountain is a challenge to manage, design, and construct. This challenge is a result of a number of factors....
Design Reviews From a Regulatory Perspective
This paper presents views on the role of the licensing engineer in the design process with specific emphasis on design reviews and the automated information management tools that support...
Computer-Assisted Geometric and Kinematic Analysis of Subsurface Faulting in the Vicinity of Yucca Mountain, Nevada, Using Balanced Geologic Cross Sections
Computer-assisted geological cross section balancing methods are used in the geometric and kinematic analysis of subsurface structures in the vicinity of Yucca Mountain, Nevada, including...
Mechanical Anisotropy of the Yucca Mountain Tuffs
Three series of measurements were performed on oriented cores of several Yucca Mountain tuffs to determine the importance of mechanical anisotropy in the intact rock. Outcrop and drillhole...
Fractal Characteristics of Fracture Roughness and Aperture Data
In this study mathematical expressions are developed for the characteristics of apertures between rough surfaces. It shown that the correlation between the opposite surfaces influences...
Assessment of Fracture-Sampling Techniques for Laboratory Tests on Core
As part of the site characterization work to be done at Yucca Mountain in Nye County, Nevada, a candidate site for the first mined-geologic repository for high-level nuclear waste, laboratory...
Yucca Mountain Site Characterization Project Waste Package Plan
The goal of the U.S. Department Of Energy's (DOE) Yucca Mountain Site Characterization Project (YMP) waste package program is to develop, confirm the effectiveness of, and...
Gaseous Release of Carbon-14: Why the High Level Waste Regulations Should be Changed
The high-level nuclear waste regulations pertaining to gaseous release of carbon-14 from a repository should be changed to allow greater release, for several reasons. Some of them are...
The Development Process for Unique Underground Equipment for Waste Handling
The Department of Energy (DOE) is currently planning to site, construct, and operate a geologic repository at Yucca Mountain, Nevada, for the disposal of high-level nuclear waste (HLW)....
State Environmental Review of a Proposed Utility Independent Spent Fuel Storage Installation
This paper describes the environmental review process which was applied by the State of Minnesota to a proposed dry cask storage facility. An environmental analysis of the proposed project...
Standardized, Utility-DOE Compatible, Spent Fuel Storage-Transport Systems
Virginia Power has developed and licensed a facility for dry storage of spent nuclear fuel in metal spent fuel storage casks. The modifications to the design of these casks necessary for...
Rancho Seco Spent Fuel Disposition Strategy
Spent fuel disposition options were studied for the shut down Rancho Seco plant. Based on comparative costs of various options, plant SAFSTOR intentions, reductions of spent fuel handling,...
Formic Acid Requirement for Savannah River Site Defense Waste Processing Facility Melter Feed Preparation (U)
The Westinghouse Savannah River Company (WSRC) will vitrify the high-level radioactive waste into a borosilicate glass wasteform using a slurry-fed, joule-heated melter. Formic acid is...
Curriculum and Instruction in Nuclear Waste Disposal
Curriculum and instruction in nuclear waste disposal is part of the larger problem of curriculum and instruction in science. At a time when science and technological literacy is crucial...
Mineralogic Alteration History and Paleohydrology at Yucca Mountain, Nevada
The importance of paleohydrology to the Yucca Mountain Site Characterization Project derives from the role water will play in radioactive-waste repository performance. Changes in hydrologic...
Fracture-Lining Minerals in the Lower Topopah Spring Tuff at Yucca Mountain
Fracture-lining minerals in the lower Topopah Spring Member of the Paintbrush Tuff at Yucca Mountain, Nevada, are being examined to characterize potential flow paths within and away from...
Return to search