Large-Scale Embankment Overtopping Protection Tests
The U.S. Bureau of Reclamation (Reclamation), Colorado State University (CSU), and the Electric Power Research Institute (EPRI) have an ongoing cooperative research effort to determine...

Progressive Failure of an Overtopped Embankment
The failure of an overtopped embankment is a problem of a very complicated nature. Concerned organizations are interested in information that can be used in future planning and development...

A New Type of Concrete Trapezoid Dam
A new type of 128.0 m height concrete trapezoid dam (t-d) has been built for the Wunana Town Hydroelectric Power Station (WTHPS). The paper presents its optimum section design, several...

Three-Dimensional Free Surface Modeling (Is There a Best Approach?)
With the increases in computing power, researchers all over the world are developing and applying three-dimensional (3D) hydrodynamic models. The numerical techniques employed are usually...

Galveston Bay 3-D Model Study Channel Deepening Lessons Learned in Management of a Large Modeling Study
The numerical modeling of Galveston Bay in 3-D for long time durations with many geometry and hydrologic scenarios, coupled with the need to store all data for subsequent use in a model...

Bank Stabilization with Environmental Features on the Middle Rio Grande
River maintenance on the middle Rio Grande has changed significantly since channel work began in the mid 1950's. Past practices included pilot or relocation channels, vegetation control,...

Evaluation of an Existing Scour Hole at the Castleton Bridge, a Tidal Crossing
Several fathometric surveys conducted in recent years showed a large depression or scour hole on the downstream southeast corner of the central pier of the Castleton Bridge over the Hudson...

Reference Surfaces for Bridge Scour Depths
Depth of scour is measured as the vertical distance between scoured channel geometry and a measurement reference surface. A scour depth measurement can have a wide range depending on the...

Probability of Bridge Failure Due to Scouring
Models to estimate depth of scour at bridge piers and abutments are available in many forms,but all of them are based on constant discharges. Their results vary widely and engineering...

Uncertainty of Bridge Scour Estimates
Pier scour is the erosion of a streambed in the vicinity of bridge pier foundations. In this paper, fuzzy regression is used to develop two pier scour models, one based on crisp laboratory...

Uncertainty Analysis of the FEMA Method for Alluvial Fans
Distributary flow areas such as alluvial fans, bajadas, and alluvial slopes, and alluvial plains along mountain bases pose quite different and interesting problems for the design of hydraulic...

Three-Dimensional Variable Resolution Hydrodynamic and Transport Modeling of the Chesapeake Bay System
This paper describes a domain decomposition methodology used in the application of the three-dimensional environmental fluid dynamics code, EFDC, to model hydrodynamics and transport in...

Mixing Character and Meandering Mechanism of a Plane Jet Bounded in a Shallow Water Layer
A plane jet in a shallow water layer is characterized by the jet width b1/2 much larger than the water depth h at large downstream distances x/h...

Structure of Coastal Upwelling on a Sloping Bottom
A large eddy simulation of coastal upwelling on a sloping bottom is carried out. The structure of the upwelling consists of a persistent primary front, a temporary secondary front which...

River Engineering Flows and Some Related Structures (State of the Art)
The first part of the paper deals with a simplified overall review of water flows. Laminar versus turbulent, visualization of flow with unsteady 3-D manner and some typical hydraulic structures...

Bridge Scour Evaluations in Washington State
Eighteen existing bridges were investigated for Washington State DOT as part of the FHWA National Scour Evaluation Program. Investigations included review of file information, site inspection,...

Three-Dimensional Modeling of the Coastal Region Offshore from Sydney, Australia
Care must be taken in model formulation to ensure that unwanted internal circulation cannot be induced. Extensive model testing must be carried out on possible distorted element shapes...

Simulation of 3D Free Surface Flows in Hydraulic Structure with Submerged Flow Passages
This paper presents primarily the results of an application of the newly refined computational simulation model to study three-dimensional flows in a lock and dam system, which has submerged...

Modeling the Tides of Massachusetts and Cape Cod Bays
A time-dependent, three-dimensional numerical modeling study of the tides of Massachusetts and Cape Code Bays, motivated by construction of a new sewage treatment plant and ocean outfall...

New York Bight Three-Dimensional Water Quality Model
The numerical modeling technology developed for Chesapeake Bay was applied to the Middle Atlantic Bight extending 550 km form Cape May, NJ, northeasterly to Nantucket Island, MA, and extending...

 

 

 

 

Return to search