Characterization of Variable Soil-Water Properties
Hydraulic conductivity, water retention, soil bulk density, and clay content were analyzed on undisturbed soil cores obtained from different depths at sixteen locations in a 24 acre watershed....
Prediction of Soil Water Properties for Hydrologic Modeling
Water flow in soils can be characterized for many boundary and initial conditions by solving governing differential equations. Thus, a physically consistent means of quantifying water...
Source Area Variability During Peakflow: A Function of Antecedent Soil Moisture Content
An attempt was made to identify the source areas contributing to peakflow and to quantify the relative importance of each source area under various antecedent soil moisture (ASM) conditions....
A Systematic Evaluation of Hillslope Subsurface Flow: The Effects of Slope Angle and Soil Parameter Variation
A two-dimensional finite element variably saturated flow model is used in conjunction with an automatic mesh generating scheme to simulate hillslope subsurface flow. Slopes from 2% to...
Forestation in Northeastern Brazil and Its Influence on Quantity and Quality of Runoff
A study is being conducted in Northeastern Brazil, at Cruzeta, in the Semi-Arid Tropic, to estimate runoff and soil displacement caused by precipitation and the influence of vegetation...
Filters and Leakage Control in Embankment Dams
In the practice of earth dam engineering there has been some doubt that downstream filters could be relied upon completely to control and seal concentrated leaks through impervious dam...
Earth Dam Seepage Control, SCS Experience
The U. S. Department of Agriculture's Soil Conservation Service (SCS) designs and administers construction of a large number of small- or medium-sized dams. SCS experience...
Abutment Seepage at Smithville Dam
After initial filling there was concern for the stability of Smithville Dam when higher than anticipated piezometric levels were experienced in the left abutment foundation. Concern heightened...
Seepage Control at Cochiti Dam, New Mexico
Significant design data, design assumptions and computations, and performance of the seepage control features provided at Cochiti Dam are summarized in this paper. The dam is a rolled...
Designing and Monitoring for Seepage at Calamus Dam
Given the complex, pervious nature of the foundation for Calamus Dam, every effort has been made to incorporate design features that will reduce and control the anticipated large volumes...
A Case History of Leakage from a Surface Impoundment
A manufacturing company constructed a 48-acre (19 hectare), unlined surface impoundment at a site in northern Texas to store wastewater. The site is underlain by unsaturated, alluvial...
Water Balance Approach to Prediction of Seepage from Mine Tailings Impoundments, Part I: General Water Balance Approach
The prediction of seepage from a tailings impoundment requires careful evaluation because the predictions can have significant economic impact upon designs, as well as permit stipulations...
Water Balance Approach to Prediction of Seepage From Mine Tailings Impoundments, Part II: Theoretical Aspects of Water Balance Approach to Seepage Modeling and Detailed Case History Results
Some of the most significant volumes and rates of interstitial tailings water discharge generally occurs during the initial portions of the primary consolidation process. During primary...
Seepage Control for Embankment Dams USBR Practice
The current Bureau of Reclamation approach to seepage assessment, analysis, and design for embankment dams is described. The advantages and appropriate applications for the analysis programs...
Permanence of Chemically Grouted Sands
Test specimens were prepared with one of three uniformly graded sands of a fine gravel and injected with one of five silicate or two polyacrylic grouts. The polyacrylic grouts showed no...
Embankment Foundation Densification by Compaction Grouting
Compaction grouting is an attractive alternate for in-place densification of liquefiable soils below existing structures. Compaction grouting application concepts and procedures are presented...
Some Aspects of Analysis and Prediction of Subsidence
A procedure based on the nonlinear finite element analysis was investigated for the prediction of subsidence caused by longwall mining. This paper presents a case study involving predictions...
Application of Displacement of Discontinuity Methods in Underground Mine Design
Displacement discontinuity methods for stress analysis, pioneered by Starfield and Crouch (see, for example, Starfield and Crouch, 1972; Crouch, 1976; and Crouch and Starfield, 1983),...
Fracture Mechanics Analysis of Massive Hydraulic Fracturing Containment
The hydraulic fracturing containment problem is the subject of the present investigation. Unlike previous studies, the interface crack geometry with the correct crack tip singularity was...
Modelling of the Fracture Process Zone in Rock
There are a number of situations in the fracture mechanics of rock in which linear elastic fracture mechanics (LEFM) concepts are inapplicable or insufficient. Two such situations are...
Return to search