Pressure Relief Under Hydraulic Jump Stilling Basins
Gravity drainage cannot be used for any portion of a structure located below tailwater level. Yet, drainage of this area may be required to relieve sub-floor pressures and reduce the risk...
General Implicit Representation of Hydraulic Structures in Numerical Flow Models
Effects of hydraulic structures (such as culverts, bridge openings, or gates) can be simulated in numerical surface-water-flow models. Generally the scale and dimension of the numerical...
Low-Flow Habitat in Flood Control Channels
A critical phase in the life cycle of many riverine species in flood control channels is during low-flow periods when the quantity and quality of available habitat diminishes. However,...
Modeling the Impacts of Plankton Entrainment in a Tropical Bay
As part of the permitting for a coal-fired power plant, several enhancements were made to the two-dimensional flow and transport models TEA and ELA that allowed for the quantification...
Drag Characteristics of Coarse Sediment in Clay Suspensions
Drag characteristics of spherical particles in clay suspensions, such as coarse sediment in hyperconcentrated flows, has been analyzed by using a limited data available in the literature....
Bridge Hydraulic Design in Tidal Situations
The analysis of bridge hydraulics and scour potential in tidal waters, in comparison with inland rivers, requires consideration of various additional factors. This paper condenses a simplistic...
Hydraulic Modeling of Fish Screens
Hydraulic model studies coupled with available knowledge of fish behavior can be important component in the development of fish-screening systems. To reproduce in a model the flow field...
Fish Screen Developments, Columbia River Dams
This paper describes developments to date for a fish diversion and bypass system being tested for two Columbia River dams. Because of the concern for the negative impacts of screen systems...
Survival of Atlantic Salmon Smolts Bypassed Through Ice-Log Sluices Determined by the HI-Z Turb'N Tag
The HI-Z Turb'N Tag was used to assess injury and mortality incurred by Atlantic Salmon (Salmo salar) smolts bypassed through ice-log sluiceways at two stations. Both sluiceways were similar...
Regulation of Flow Downstream of Weirs
Reregulation weirs are one means adopted by the Tennessee Valley Authority (TVA) to provide continuous improved minimum flow and wetted area for aquatic life downstream if hydroprojects...
Storm Drainage Channel Rehabilitation
30 km (19 miles) of existing concrete lines storm drainage channels were studied due to repeated failures. Alternate failures causes were hypothesized and evaluated. Physical testing was...
Tetrapods as a Scour Countermeasure
Few materials have been studied for their effectiveness in protecting bridge piers and abutments from local scour other than riprap. Recent research conducted at the FHWA research facility...
Variations Encountered in Design Analysis of Local Scour at Drop Structures
Proper design of drop structures can prevent failure due to scour at upstream structures, like bridges. An important aspect of drop-structure design is the prediction of the local scour...
Threats to Bridge Stability from Scour Related Failures of Drop Structures
Catastrophic failure of bridge foundations may occur when channel bed elevations are lowered unexpectedly. Bridges to be constructed in channels that are known to have bed degradation...
Prediction of Filtrate Turbidity by Parameter Estimation
In order to operate the rapid sand filter in response to the time variation of effluent quality, a model and a procedure to predict the filtrate quality of rapid sand filters have been...
A Simple and Reliable Method For Analysis of Water Supply Distribution
The proposed analysis, may be regarded as a bridge between the practical sample analysis and the optimization model development. From the analysis and observation of water distribution...
Friction Loss Equations for Hydropower Facilities
Many water suppliers are pursuing economic benefits from water supply and distribution systems through development of hydropower facilities on pipelines. Excessive pressure head that used...
Hydraulic Modeling of High Unit Discharge Energy Dissipators
The incorporation of an efficient and economical energy dissipation device is critical with respect to the safe operation of a high unit discharge spillway. The development and design...
Emergent Techniques in Scour Monitoring Devices
This paper presents a brief status report of a research and development project funded by the National Cooperative Highway Research Program (NCHRP) to develop and test scour monitoring...
Riprap Design at Bridges?Factor of Safety Approach
The factor of safety method offers a physically based methodology for design of riprap that relates the applied shear stress on the channel boundary to the stability of the riprap layer....
Return to search