Stable Channels with Loose Boundary
Recently, G. Parker suggested that the lateral transport of downstream momentum due to Reynolds stresses should be included in the momentum balance used to calculate the boundary shear...
Pinto Wash Alluvial Fan Litigation
This paper presents a case history involving flood/damage litigation brought by a downstream farmer against an upstream farmer and a local public irrigation district. The case combined...
Applications of GSTARS Model
GSTARS is a Generalized Stream Tube model for Alluvial River Simulation. Depending on an engineer's need, GSTARS can be used as a fixed boundary as well as a movable boundary...
Two-Dimensional Numerical Modeling for Long-Term Sedimentation
Numerical modeling of long-term sedimentation processes in multi-dimensional models is computationally intensive and thus often uneconomical. A statistical superposition technique has...
Mathematical Modeling of Compound Channel with High Sediment Concentration
The mathematical model for erodible channels, FLUVIAL-12, has been extended to simulate the fluvial processes in the lower reach of the Yellow River in China. Fluvial processes in the...
Geotechnical and Hydraulic Stability Numbers for Channel Rehabilitation: Part I, the Approach
A model of incised channel evolution was developed to integrate the geotechnical and hydraulic factors that are involved in channel rehabilitation. Bank stability is attained when the...
Riprap Design by Modified Safety Factor Method
The Safety Factor method for designing riprap is based upon straight forward physics combining rock properties and flow characteristics. M.A. Stevens developed the method by summing the...
Stratigraphy of Alluvial Fan Flood Deposits
The purpose of this paper is to describe an engineering geologic technique for assessing the frequency and magnitude of sedimentation events on alluvial fans. The technique is based on...
Design Depths and Velocities on Alluvial Fans
Under Federal Emergency Management Agency (FEMA) guidelines, flood depths and velocities on alluvial fans are determined by considering the probability of a given point on the alluvial...
Computations of High-Velocity Flows on Alluvial Fans
The results of numerical models of supercritical flows on alluvial fans demonstrate the strong effect fan topography has on flow velocity and depth. Particularly important are transverse...
Three-Dimensional Modeling of Cohesive Sediments and Pollutants in Surface Waters
Particulate and dissolved pollutant transport rates are predicted using a pollutant transport modeling system. The latter is a finite element model capable of simulating three-dimensional...
Hydrologic Conditions at the Des Plaines Wetlands
An area of abandoned farmland and gravel quarries in northeastern Illinois has been converted to a test site for methods to reestablish or restore wetlands. Four stream gaging stations...
Stochastic Characteristics of Cobble-Gravel Bed Load Transport
Prototype tests of stochastic characteristic of cobble-gravel bed load transport have been done in Dujiangyan reach of Minjiang River in China in 1977-1985. All of 718 sample data from...
Hydraulic Study for the Construction of Artificial Islands in Peoria Lake, Illinois
Long-term sediment accumulation in the lake reduced the average depth of the lake from 8 feet in 1903 to 2.6 feet in 1985, which resulted in the deterioration of aquatic habitats and recreational...
Upland Erosion Estimates Based on Rainfall Depth
The probability density functions of rainfall duration and intensity are coupled with a physically-based dynamic formulation of rainfall-runoff-sediment transport for upland areas. When...
Emergency Response to the 1983 Debris Flows Along Utah's Wasatch Front
The wet cycle experienced in Utah culminated in approximately one thousand landslide triggered debris flows caused by rapid melt of unprecedented snow accumulation in the Wasatch Mountains,...
Mathematical Modeling of Delta Deposits and Retrogressive Erosion in Reservoirs
A hybrid computer model which simulates mainly delta deposition and retrogressive erosion in reservoirs is described. Basic equations that govern the flow and bed changes used in the model...
Analysis of Onsite Measurements of Scour at Piers
Existing onsite measurements of local scour at bridge piers were assembled and analyzed to obtain an equation that predicts the expected maximum depth of local scour at a bridge pier....
The Life and Science of R. A. Bagnold
The purpose of this paper is to highlight and honor the exciting life and many significant contributions made by Brigadier Ralph A. Bagnold to our understanding of hydraulics and sediment...
Reliability of Compacted Soil Liners
Determination of transport times of contaminants through a soil liner is hindered by the inherent spatial variability of the hydraulic conductivity of compacted soil. The existence of...
Return to search