Convergence Rates of the Method of Successive Elastic Solutions in Thermoplastic Problems of a Layered Concentric Cylinder
This paper examines convergence rates of the method of successive elastic solutions, proposed by Mendelson, in determining the thermoplastic response of an arbitrarily layered concentric...
Spacecraft Wall Design for Orbital Debris Impact
This paper describes a method for obtaining the optimal rise angle of corrugated bumpers for the design of space structures in the event of an on-orbit impact. The procedure determines...
Implementation of a Viscoplastic, Kinematic Hardening Constitutive Model for Impact Prediction
This paper reports on a preliminary study to determine the significance of the Bauschinger effect on modeling impact and other large deformation events. Such events have significant implications...
Distributional Information for Ejection Fragments
Due to lack of experience of building structures on the lunar surface and the variability that will exist in the loading as well as the structural resistance, it is suggested that initial...
Erectable Truss Hardware for Large Space Structures
The KATLOK connector is a truss structure connector that was designed to be compatible with manual assembly by an astronaut in an extra-vehicular activity (EVA) suit, telerobotic assembly...
TOPAZ II Qualification and Nuclear Testing Program
This paper presents an overview of the Topaz II qualification and nuclear test program. The program combines the joint efforts and resources of Russian and American specialists and organizations...
A Generic Inflatable Structure for a Lunar/Martian Base
The first steps in the human expansion into space, which inevitably will occur during the next century, consist of the establishment of a human-tended base on the Moon followed by human...
Understanding ISO
Many U.S. consulting firms are being registered under the International Organization for Standardization (ISO) 9000 series, which set standards for business conduct to achieve quality....
Safety Assessment of a Chemical Reactor Vessel
The potential explosion loadings on a chemical reactor vessel is described in this paper. The potential loads presented provide a basis for designing spherical storage vessels which will...
The Inelastic Response of an Offshore Platform in Hurricane Andrew
Amoco's Gulf of Mexico South Timbalier 161A platform took a direct hit from Hurricane Andrew in August of 1992, experiencing loads which far exceeded its design load. The platform had...
Nonlinear Collapse of Offshore Jacket Structures
The Joint Industry Tubular Frames Project was established with ten oil industry sponsors to investigate the reserve and residual strength of frames typical of offshore structures. To date...
Load Duration Effects in an 85-Year-Old Timber Structure
Duration of load (DOL) effects are assessed in 85-year-old heavy timber trusses using five common DOL models. These models are based on the idea of static damage accumulation. Material...
Dynamic Loading of a Rigid Frame Bridge
The objective of this paper is to investigate the dynamic response of a rigid frame bridge to two trucks (side by side) passing over the rough bridge deck. The rigid frame bridge is designed...
Bridge Rail Impact Forcing Functions
Bridge rails are designed according to AASHTO standards with a static 10-kip (44.5 kN) lateral load. The computer programs BARRIER VII and COSMOS are used to determine the deflections...
Cumulative Impact of Heavy Permit-Trucks on Steel Bridges
In many parts of North America, special permits are issued to heavy vehicles without considering their cumulative effect on steel bridge components. Such overloads may initiate crack propagation...
U.S. / Japan Large Scale Cooperative Research Program for Steel Structures
The US/Japan Cooperative Research Program Utilizing Large Scale Test Facilities for Earthquake Resistant Design was initiated in 1980 using a combination of full-scale, small-scale, subassemblage...
Impediments to the Implementation of Seismic Isolation
There are over 400 civil engineering structures, worldwide, that have been constructed using the principles of seismic isolation, and 70 of these are in the United States. Although use...
First Bank Place: A Composite Cruciform Spine
The First Bank Place, designed by the internationally known architectural firm of Pei Cobb Freed and Partners, is a granite-clad, 56 stories tall building in downtown Minneapolis. Presented...
Composite Walls as Shear Elements in Tall Structures
This paper describes a system of composite walling that can be used as a lateral load resisting system in tall structures. The composite walling comprises two skins of profiled steel sheeting...
Talmadge Bridge Replacement
This paper discusses the design of the main spans and approach spans for the replacement of the Talmadge Bridge for the Georgia Department of Transportation. The design of the concrete...
Return to search