Design, Construction, and Performance of a Baffled Breakwater
The Spud Point Marina breakwater is located within Bodega Harbor, a protected embayment on the northern California coast. Waves are attenuated by baffle panels hung between support piles....
57 Years of Coastal Engineering Practice at a Problem Inlet: Indian River Inlet, Delaware
This paper presents a review of Indian River Inlet's behavior in its natural state prior to jetty construction and summarizes the level of understanding of coastal processes and inlet-bay...
An Engineering Assessment of Hydrodynamics and Beach Response at Little River Inlet, NC-SC
The Waterways Experiment Station's (WES) Coastal Engineering Research Center (CERC) conducted an analysis for the U.S. Army Engineer District, Charleston (SAC) of the monitoring data collected...
Design and Construction of Shinnecock Inlet, New York
Shinnecock Inlet is the easternmost of six coastal inlet which bracket the barrier island on the south shore of Long Island, New York. Through recent history, Shinnecock Inlet has exhibited...
Scour Hole Development and Stabilization at Shinnecock and Moriches Inlets, New York
A scour hole developed inside the Shinnecock Inlet channel near the tip of the west jetty. Over the years, this hole deepened to about 70 ft below the mean low water level with the average...
South Jetty Scour Hole Stabilization, Ocean City, Maryland
Formation of a scour hole along the inlet side of the South Jetty at Ocean City occurred after jetty construction as a result of ebb tidal flow in the inlet. Analysis of historical bathymetry...
Alternative Study for the Breakwater and Fishing Pier Rehabilitation at Playland Park, Rye, New York
An alternative study was conducted to determine that existing condition of a deteriorated timber pier and a rubblemound breakwater, and to develop alternative rehabilitation plans leading...
Case Study of an Offshore Horizontal Boring
A pipeline system was needed to transport natural gas from a discovery in Mobile Block 823 to Mobil's existing system inside Mobile Bay. Sand Island, a small barrier island off Dauphin...
Subaqueous Disposal Area Development and Mitigation
Development of subaqueous dikes on soft soils extensively utilized geosynthetics. The design adopted a wide-bermed embankment with high-strength geotextile for tensile reinforcement and...
Construction on Wisconsin's Lake Michigan Coast
This paper provides a preliminary evaluation of a set of 100 residential properties along Wisconsin's Lake Michigan coast; an examination of the vulnerability of coastal homes and adequacy...
Design Considerations for Small Artificial Islands in Franks Tract, California
Small, artificially-created islands may provide significant recreation and habitat benefits. Costs, however, can also be high. The initial dollar cost of creating an artificial island,...
Dutch Experience on Design of Dikes and Revetments
The increased demand for reliable design methods for protecting structures has resulted in The Netherlands in preparing a set of design guidelines for design of dikes and revetments. The...
Development of Detached Breakwater Design Criteria Using a Shoreline Response Model
An evaluation of beach response to detached breakwaters was conducted using the numerical shoreline response model GENESIS. Functional design parameters such as structure length, gap distance,...
Application of a Dolos Structural Design Procedure
Dolos concrete armor units are widely used to protect coastal structures. New developments in armor unit strength design permit the armor unit designer to optimize the dolos parameters...
Concrete for Sealing Voids in Rubble Structures
Permeability of rubble-mound breakwaters and jetties to sand transport and wave transmission results in increased costs for dredging and navigation. Guidance is provided for economically...
Application of Extremely Low Altitude Photogrammetry for Monitoring Coastal Structures
Extremely low altitude mapping photography exposed from a helicopter is showing considerable promise in providing another method of extending the many benefits of photogrammetric data...
The Application of Technology to Solving Practical Problems
In this paper, the roles of the scientist, technologist, engineer, and manager are discussed to place them in perspective. A distinction is made between the coastal engineer' and practicing...
Role of the Coastal Engineer in Civil Engineering Practice
Coastal engineering is a specialized discipline of civil engineering that encompasses a wide variety of activities related to harbors, navigation, shore erosion and storm protection. Because...
Value Engineering in Coastal Design
A formal procedure of value engineering can be applied to coastal design to refine a design and reduce the construction costs. Despite the relatively simple technology and materials used...
Environmental Impact Analysis of Coastal Projects
It is fairly routine to describe the range of impacts that might occur as a result of a proposed improvement, but problems and controversy often accompany attempts to answer the more pressing...
Return to search