Rehabilitation of Terminal Ballast Water Piping
In order to maintain the integrity of the ballast water piping system at the Marine Terminal of the trans-Alaska pipeline, a composite lining system was installed in the 42-inch (1,067...
Pipeline Infrastructure Rehabilitation
A significant amount of technological development has occurred during the past ten (10) years regarding the actual rehabilitation methods, or reconstruction procedures on the decaying...
Trenchless Techniques for Pipeline Installation, Renovation and Replacement
New construction methods have been developed primarily in Europe and Japan for underground pipeline work. The new methods, known as trenchless techniques, are primarily used when existing...
Monitoring the Effects of the Pipe Insertion Machine Technique
The results of an experimental study of the pipe insertion machine are presented in this paper. Strains induced in an adjacent pipeline, soil displacement, pipe deflection and vibrations...
Water Main Cleaning and Lining?A Utility Perspective
The Chester Water Authority is a regional water supply system located in Southeastern Pennsylvania serving a population of over 140,000 people in two countries and a large industrial complex...
Planning for Rehabilitation?MWRA Waterworks System
The Massachusetts Water Resources Authority (MWRA) operates and maintains 255 miles of large diameter distribution mains. Existing problems include increasing steel pipe repairs and extensive...
Buried Pipeline Research Needs
A workshop was convened with representatives from universities, consulting engineering and research organizations, pipe and/or equipment manufacturers, constructors, users, and government...
Effects of Ground Failure on Ductile Iron Pipe
The design studies and procedures outlined in this paper for pipelines that must cross earthquake fault zones are also applicable to similar ground disturbances resulting from landslides,...
Water Pipeline Infrastructure; Design Now for Future Ease of Repair
This paper covers the general types of water pipe joints presently in the ground in the United States. It also covers the methods used to repair joints and damaged pipes, pipe cutting,...
Seismic Counter-Measures for Buried Pipelines
This paper deals with the seismic counter-measures for mitigating hazards from earthquake damages to buried water and sewer pipelines. To achieve an overall program for the earthquake...
New Pavement Materials
New materials and construction techniques are constantly being evaluated to extend pavement life and to improve overall performance of highway and airfield pavements. To be beneficial,...
Cable Stayed Bridges
Two of these five papers on cable-stayed bridges deal with wind analysis. One develops the theory for motion due to flutter and reaches the conclusion that the vibrations are, in general,...
Embankment Design and Construction in Cold Regions
This book is a state-of-the-practice report on embankment design and construction in cold regions involving either permafrost or seasonal frost areas. The similarities and differences...
Effects of Oil Spills on Water Retention in Sandy Soils
This paper concerns the relationships between water and oil saturations in sandy soils. Special attention is given to an environment similar to the groundwater table and the capillary...
Control of Surge Pressures in Irrigation Systems
Excessively high or low pressure within an irrigation system can result in damage to pipelines, pumps, valves, and on-farm facilities. Frequently, these pressure variations are caused...
Underdrain Tube Wall, Perforation Design and OBPA to Minimize Bio-Chemical Clogging
Bio-chemical clogging of underdrains has been most frequently associated with iron deposits (ochre). The underlying sticking agents have been a variety of bacteria and their exudates commonly...
Bulk Stomatal Resistance in Operational Estimates of Evapotranspiration
General relationships for estimating canopy or bulk stomatal resistance and aerodynamic resistances of grass and alfalfa reference crops for use in the Penman-J.L. Monteith equation are...
Ultrasonic Flow Meter Testing
Six ultrasonic flow meters were tested in a hydraulics laboratory. Accuracies better than 2% were obtained with two transit-time meters on 14 inch diameter steel tubing. Poorer accuracies...
Stable Channels with Loose Boundary
Recently, G. Parker suggested that the lateral transport of downstream momentum due to Reynolds stresses should be included in the momentum balance used to calculate the boundary shear...
Near-Bed Sediment Concentration in Non-Uniform Flows Over Gravel Beds
The calculation of near-bed sediment concentration is formulated in terms of equations governing the dispersion of heavy particles in non-uniform turbulent shear flows over stable gravel...
Return to search