ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

A Rocky Mountain Project Intake/Discharge Channel Flow Simulation Study
A two-dimensional depth-integrated finite element flow model was applied to evaluate pumping and generating flow conditions at the Rocky Mountain Project powerhouse intake/discharge channel....

Dardanelle Turbines
The Dardanelle turbines located at river mile 205.5 of the McClellan-Kerr Arkansas River Navigation System, are experiencing an unusual amount of wear in the blade trunnion bushings. Oil...

Diagnostic Testing and Repair of Grand Rapids Generating Station's Unit Four
This paper is a case history that discusses diagnosis and correction of a variable pitch propeller type (Kaplan) hydraulic turbine problem. The turbine problem involved fatigue failures...

Application of Personal Computers to Field Flow Measurement
Flow measurements are often necessary to verify the performance of hydro turbines for regulatory, contractual, or engineering purposes. Historically, several methods utilizing various...

History of Lysimeter Design and Use for Evapotranspiration Measurements
Lysimeters are devices for measuring percolation of water through soils and sampling soil water for chemical analyses. Lysimeters have been used for over 300 years to determine water use...

Lysimeter Techniques and Application in India
Water is the most important resource and limiting factor for crop and industrial production in India, and agriculture is the largest consumer of water. The measurement of evapotranspiration...

Comparation of Different Forms of Penman Equation
The research was carried out near Foggia (in Southern Italy) at 90 m above sea level and at 41? 27' N latitude, using two drainage lysimeters, filled with a silt clay soil...

Lysimeters: Data Acquisition and Analysis
Lysimeters provide the most direct method for measuring evapotranspiration (ET). For ten years we have used weighing lysimeters capable of a resolution equivalent to 0.02 mm of water....

Modeling Tertiary Unit Performance in Large Irrigation Systems
Large irrigation systems constructed in the Asian region, deliver water over a wide area with varied agroclimatic conditions and cropping patterns. In order to evaluate the performance...

An Analytical Technique of Flow Rate Into Perforated Draintubes
The flow rate into a draintube in a saturated soil media depends on numerous characteristics such as the hole size, the number and spacing of holes, the drain size and depth. Based on...

Numerical Methods Used to Model Unsteady Canal Flow
Investigating the response characteristics of irrigation waer supply and distribution systems is essential if a good design is to be developed. Numerical simulation techniques have been...

Erosion Potential of Pacific Basin Precipitation
Average annual erosivity (EI) values were developed using 20 years of hourly precipitation data from weather stations located on each of 10 Pacific Basin islands. Average annual erosivity...

Numerical Methods for Simulating Debris Blockage Failures and Mudflows
This paper presents the procedures and results from an investigation to evaluate the hydraulic characteristics of mudflow events resulting from hypothetical failures of a debris blockage...

Modeling Nitrogen Movement Through Loess Soils
This study evaluates the ability of the Root Zone Water Quality Model (RZWQM) to track the movement and fate of nitrate (NO₃^--N)...

Two-Dimensional Analysis of Furrow Infiltration
A general applicable two-dimensional unsaturated-saturated model for transient soil-water flow conditions in heteogeneous soils was developed. The water flow model was applied to simulate...

Heavy Metal Transport in the Columbia River, British Columbia
Data on the total forms of selected metals were used to assess their concentrations at two sampling sites on the Canadian Columbia River from 1984 to 1989. Cadmium, the response variable...

Enhanced Multi-Dimensional Modelling of Marshes and Wetlands
This paper summarizes the verification and application of a two-dimensional finite element model capable of simulating the complex circulation characteristics in marshes and wetlands for...

Testing a Method-of-Characteristics Model of Three-Dimensional Solute Transport in Ground Water
A new three-dimensional model of solute transport in groundwater that is based on a widely used two-dimensional method of characteristics model and is coupled to a modular finite-difference...

Predicting Incipient Fluidization of Fine Sands in Unbounded Domains
Fluidization systems in the coastal environment consist of a water pumping system and a source pipe buried in or near a tidal inlet to maintain a channel or to aid in sand bypassing. If...

Sensitivity Analysis of a Ground-Water-Flow Model
A sensitivity analysis was performed on 18 hydrological factors affecting steady-state groundwater flow in the Upper Floridan aquifer near Albany, southwestern Georgia. Computations were...

 

 

 

 

Return to search