Acoustic Silt Density Measurement
Significant savings can be achieved on the costs of operations for the deepening and maintenance of navigation channels and harbor basins in muddy areas provided that computations are...
Turbidity Generated by a Model Cutterhead Dredge
The study of turbidity generation indicates that, in general, turbidity increases with an increase in the cutter speed and an increase in the cutter swing velocity. A silt curtain deployed...
Shoaling Problems and Improvements Sunny Point, North Carolina
The Military Ocean Terminal, Sunny Point (MOTSU), is located on the Cape Fear River, approximately 18 miles downriver from Wilmington, North Carolina. The facility has experienced significant...
Sediment Resuspension from Dredging Activities
Dredges are a logical choice for removing contaminated sediments from our Nation's waterways. Historically, the dredging industry has emphasized increased production in an...
Influence of Roughness on Velocity and Dispersion at Low Flow
Dependence of the hydraulic and transport characteristics of low flow on channel roughness is investigated. Empirical expressions are used to estimate roughness coefficient as a function...
Buoyant Jet Solution with Synthetic Entrainment Function
A synthetic entrainment function is proposed for buoyant jets discharged at an arbitrary angle into otherwise quiescent ambient fluids. The entrainment function consists of two separate...
Effects of High Sediment Concentrations on Velocity and Sediment Distributions
Several classifications are required to describe sediment-transporting flow. The flow may be turbulent or laminar, Newtonian or non-Newtonian, and may also have a uniform or nonuniform...
High Sediment Concentrations Require High In-Channel/Supply of Sediment
Flows with high sediment concentrations (greater than 10 percent by weight) most commonly occur either as debris flows in steep channels throughout the world, or as hyperconcentrated flows...
Flow Parameters of Fluid Mud
A set of small-scale, high-resolution velocity and stress sensors based on rugged metal-clad hot wires and epoxy-encapsulated hot films is to be evaluated for its performance characteristics...
Numerical Model of Mississippi River at Lock and Dam 26
Replacement work was initiated in November 1979. The first stage cofferdam constricted about half of the river channel. As a result, the flow velocity at the constriction increased causing...
Incipient Resuspension of Silt-Clay Sediment
The laboratory study of incipient motion of fine-grained cohesive sediment under oscillatory flow, unidirectional flow and the combined effects of oscillatory and unidirectional flow is...
Numerical Flood Routing for Natural Channels
A numerical model has been developed for simulating the propagation of a flood wave in a natural channel. Using this numerical model, the influence of the factors affecting the motion...
Mechanics of Mudflows
A Bingham model is adopted to study the fluid mechanics of mudflows. Equations for predicting the transition from laminar to turbulent flow in an open channel are formulated and verified...
Analysis of Partially Filled Circular Storm Sewers
The classic design approach uses Manning's formula. Comparisons between analytical results obtained in this manner and the many available experimental results indicate substantial...
Accurate Computation of Nonlinear Advection
Advection, the transport of a quantity by the mean velocity, is a process which appears in virtually all equations of free-surface hydraulics. The demonstrated accuracy and efficiency...
Boundary Element Analysis of Flow in Heterogenous Porous Media
The boundary integral equation method (BIEM) is an efficient numerical method which has been applied to a wide variety of engineering problems governed by a partial differential equation...
Higher-Order Methods for Transient Free-Surface Flows
One-dimensional transient free-surface flows in open channels are described by a set of quasi-linear hyperbolic partial differential equations, called the Saint-Venant equations. Numerical...
Numerical Modeling of Flow in Hydropower Intakes
To reduce high mortality of downstream migrating juvenile salmon at hydraulic turbines, traveling screens are used to guide the juveniles into a bypass channel for safe passage. However,...
Coping with High and Low Pressures of Transient Flow
Conditions exist in most long distance water pipelines, such that abnormal but inevitable occurrences will cause transient flow. Often the most crucial conditions for consideration by...
Hydraulic Analysis of Water Transmission Flowing Party Full
The hydraulic behavior of a transmission line that flows full along only part of its length is more difficult to analyze than a completely full line. Unsteady open-channel and closed-conduit...
Return to search