General Implicit Representation of Hydraulic Structures in Numerical Flow Models
Effects of hydraulic structures (such as culverts, bridge openings, or gates) can be simulated in numerical surface-water-flow models. Generally the scale and dimension of the numerical...
Low-Flow Habitat in Flood Control Channels
A critical phase in the life cycle of many riverine species in flood control channels is during low-flow periods when the quantity and quality of available habitat diminishes. However,...
Drag Characteristics of Coarse Sediment in Clay Suspensions
Drag characteristics of spherical particles in clay suspensions, such as coarse sediment in hyperconcentrated flows, has been analyzed by using a limited data available in the literature....
Bridge Hydraulic Design in Tidal Situations
The analysis of bridge hydraulics and scour potential in tidal waters, in comparison with inland rivers, requires consideration of various additional factors. This paper condenses a simplistic...
Hydraulic Modeling of Fish Screens
Hydraulic model studies coupled with available knowledge of fish behavior can be important component in the development of fish-screening systems. To reproduce in a model the flow field...
Fish Screen Developments, Columbia River Dams
This paper describes developments to date for a fish diversion and bypass system being tested for two Columbia River dams. Because of the concern for the negative impacts of screen systems...
Survival of Atlantic Salmon Smolts Bypassed Through Ice-Log Sluices Determined by the HI-Z Turb'N Tag
The HI-Z Turb'N Tag was used to assess injury and mortality incurred by Atlantic Salmon (Salmo salar) smolts bypassed through ice-log sluiceways at two stations. Both sluiceways were similar...
Tetrapods as a Scour Countermeasure
Few materials have been studied for their effectiveness in protecting bridge piers and abutments from local scour other than riprap. Recent research conducted at the FHWA research facility...
Variations Encountered in Design Analysis of Local Scour at Drop Structures
Proper design of drop structures can prevent failure due to scour at upstream structures, like bridges. An important aspect of drop-structure design is the prediction of the local scour...
Threats to Bridge Stability from Scour Related Failures of Drop Structures
Catastrophic failure of bridge foundations may occur when channel bed elevations are lowered unexpectedly. Bridges to be constructed in channels that are known to have bed degradation...
Prediction of Filtrate Turbidity by Parameter Estimation
In order to operate the rapid sand filter in response to the time variation of effluent quality, a model and a procedure to predict the filtrate quality of rapid sand filters have been...
Emergent Techniques in Scour Monitoring Devices
This paper presents a brief status report of a research and development project funded by the National Cooperative Highway Research Program (NCHRP) to develop and test scour monitoring...
Riprap Design at Bridges?Factor of Safety Approach
The factor of safety method offers a physically based methodology for design of riprap that relates the applied shear stress on the channel boundary to the stability of the riprap layer....
Model Study of Rio Hondo Flood Control Channel, Los Angeles, California
The Rio Hondo Flood Control Channel located within the Los Angeles County Drainage Area (LACDA) is part of a Comprehensive flood control system which includes 20 dams, 129 debris basins,...
Effect of Fenders on Local Pier Scour
Physical model experiments were performed in the Hydraulics and Sediment Research Institute, Delta Barrage, Egypt, to determine the effect of fenders on the scour depth around circular...
Application of Environmental Regulations on Design of Hydraulic Structures for Open Cooling Water System
Design of intake and discharge structures for an open cooling water system for a thermal power plant requires that the design of hydraulic structures meets the federal, state, and local...
Methods for Prediction of Maximum Scour at Coastal Structures
The most common coast scour-related problems are toe scour at rubble mound structures and vertical seawalls, and scour at the base of piles and horizontal pipelines. Existing scour prediction...
Design of a Curved Baffle Energy Dissipation Structure
A curved baffle energy dissipation structure was designed and constructed based on the results of hydraulic and analytical models. Field tests of the prototype demonstrate close comparison...
Relation of Local Scour to Hydraulic Properties at Selected Bridges in New York
Hydraulic properties, bridge geometry, and basin characteristics at 31 bridges in New York are being investigated to identify factors that affect local scour. Streambed elevations measured...
Scour Inspection Using Ground Penetrating Radar
This paper examines the capabilities of Ground Penetrating Radar (GPR) for river bed scour inspection based on a study carried out by Clarkson University, Potsdam, New York in association...
Return to search