Guidelines for Field Evaluations of Pothole Repairs
Prepared by the Highway Innovative Technology Evaluation Center, a CERF Service Center. This report describes the HITEC evaluation plan for Bondade,...
A Safer Earthquake Design Code After NorthRidge
Three recent killer California earthquakes have demonstrated serious deficiencies in our current building codes. As they do after all such events, officials in California and other states...
More Parking Above
Vertical expansion of six (6) new floors of parking garage on top of four (4) floors of existing structure that was built over three decades ago, adding 155,000 square foot of new structure....
Tracking a Serial Filter
The Humboldt Bay Municipal Water District in northern California conducted pilot testing of extreme/high-rate serial filtration (EHRSF) to see if the process could meet water treatment...
Failures in Civil Engineering
Structural, Foundation and Geoenvironmental Case Studies
This special publication consists of a collection of short descriptions of failures case studies in Civil Engineering. The descriptions cover cases in structural, foundation and geoenvironmental...
Foundation Upgrading and Repair for Infrastructure Improvement
This proceedings,
Performance of Deep Foundations Under Seismic Loading
This proceedings,
Deep and High in Hawaii
The First Hawaiian Center, headquarters of the First Hawaiian Bank, will be the tallest building in Hawaii when it is completed in 1996. The unusual design, by architects Cohn Pedersen...
Berlin's Big Dig
As the first of many major development projects for the new Berlin, the DM 1.5 billion FriedrichstadtPassengen project is the largest private construction investment in Berlin's...
A Primer on Micropiles
A major study of micropile technology has recently been funded by the Federal Highway Authority and completed by the authors. The subject is defined as a drilled and grouted, cast-in-place,...
Developing Plans for Robotic Excavators
We would like a robot excavator that is able to excavate a volume of soil according to specification. To this end we have developed a general method that can be used to provide prescriptions...
Effects of Force Reflection on Telerobotic Performance
The University of Kansas Augmented Telerobotics Laboratory conducted a study to examine the effects of force reflection on telerobotic system and operator performance in performing two...
Braced Double Skinned Structure in Lunar Application
A parametric study is designed to evaluate a proposed Braced Double Skinned roof structure utilizing extrapolated theoretical solutions i.e. Navier's solution and Levy's solution. A Finite...
Modal Interaction in the Response of Laminates
A higher-order shear-deformation theory is used to analyze the interaction of two modes in the response of thick laminated rectangular plates to transverse harmonic loads. The case of...
Comparison of Donnell and Higher Order Nonlinear Models for Dynamically Loaded Composite Plates and Shells
The dynamic buckling behavior of composite cylindrical shells subjected to a transverse point load is considered. The behavior of undamped cylindrical shells of varying radii is analyzed...
Postbuckling Response of Doubly-Curved Shallow Panels Under Complex Loading Conditions
The static postbuckling of laminated doubly-curved shallow panels subjected to the complex action of a system of in-plane compressive edge loads and a transverse pressure field is investigated....
Allowable Design Loads for Marman Clamp Systems
Marman clamp separation systems have many aerospace applications. One of their most important applications is in the attachment of spacecraft to expendable launch vehicles. Because their...
Axisymmetric Vibrations of Thick-Walled Cylindrical Tubes in the Presence of Thermal Residual Stresses
The paper presents an approach to the analysis of axisymmetric vibrations of thick-walled specially orthotropic multilayered cylindrical tubes. The first part of the paper is concerned...
Inelastic Response of Metal Matrix Composite Tubes
An analytical method which exactly satisfies the equations of the boundary value problem for the inelastic response of laminated metal matrix composite tubes on a point-wise basis is presented....
Thermal Stresses in Piezoelectric Materials: A Boundary Integral Formulation
With the increasing use of piezoelectric materials in electromechanical devices which are often required to function in thermally hostile environment, thermal stresses and their influence...
Return to search