Extended Life Span
The Harlem River Lift Span�part of New York City's Triborough Bridge System�was the largest vertical span in the country at the time of its construction in 1936. The lift...
Airport on the Move
The Dallas/Fort Worth International Airport (DFW) is building an automated people mover (APM) system as part of a five-year, $2.6-billion capital development program that includes three...
The Shape of Things to Come
High-performance steel (HPS) offers improved toughness and durability for bridge construction. This article presents several innovative concepts for HPS structural systems�including I-girders...
Walled In (Available in Geo-Environmental Special Issue only)
For more than 50 years manufacturing plants adjacent to the northeast bank of a midwestern creek produced asbestos-reinforced construction materials. When manufacturing at the plants ceased...
Keeping It Together
A new framing system for precast concrete columns and beams will allow tall buildings to withstand large earthquakes without damage to the structural integrity of the building. By using...
It's All in the Bracing
When the Massachusetts Bay Transportation Authority (MBTA) hired Weidlinger Associates Inc., Cambridge, Mass., to renovate the Aquarium Station stop along the subway system's...
Making the Connection
This article details the results of a pilot research project on the use of polymer composites and high-strength adhesives for the structural repair of damaged steel frame connections....
Covered Bridge Connection (Available in Structural Engineering Special Issue only)
A 145-year-old timber bridge in Downsville, New York, now rests on the longest glue-laminated wood beams ever produced in the United States. Six 53 m (174 ft) long chords were threaded...
High Strength Concrete
This proceedings,
Back from the Brink
The Cape Hatteras Lighthouse, the tallest brick lighthouse in the United States, has been moved to prevent it from toppling into the sea as a result of coastal erosion. Engineers from...
State of the Arts
The complicated structural engineering that went into the Nancy Lee and Perry R. Bass Performance Hall in Fort Worth, Texas, allows patrons and performers to focus fully on the arts, and...
Shake, Rattle and Hold (Available in Structural Engineering Special Issue Only)
In-situ lateral load tests of two bridge bents were conducted on Interstate 15 in Salt Lake City, Utah, to determine the strength and ductility of an existing concrete bridge and the improvements...
Bulb-Tees Make More Efficient Long-Span Bridges
The bulb-tee girder has helped erect new bridges with fewer I-beams, and is also shown in studies to be a structurally efficient, cost-effective alternative for long-span bridges....
Timber!
For engineers accustomed to working with steel, using large wood beams in structural applications can be an unusual experience. Three Midwestern construction projects�a nature center,...
Parking Lot Corrosion Cure
The $3 million structural repair and restoration of a large post-tensioned parking structure required engineers to replace 2,400 tendons while keeping the parking garage in service. After...
Northridge Postscript: Lesson on Steel Connections
Immediately after the Northridge earthquake in January 1994, the general concensus was that steel-framed buildings performed extremely well. Later, inspectors were surprised to find weld...
Wood Working
Engineers may be more accustomed to working with concrete and steel, but for certain projects aesthetics, cost or other considerations may make wood the preferred choice. According to...
More Parking Above
Vertical expansion of six (6) new floors of parking garage on top of four (4) floors of existing structure that was built over three decades ago, adding 155,000 square foot of new structure....
Sounding Out Scour
As engineers are aware, detection of bridge scour is the best protection. A method for monitoring scour during low, normal or high water flows would also help alleviate some of the ambiguity...
Dynamic Analysis of a High Speed Transport Model by Using a Piecewise Continuous Timoshenko Beam Model
Conventional treatment of structural dynamic analysis and control is based on the finite element structural model. But such a treatment uses a very large number of elements which is usually...
Return to search