Performance Limits for Deepwater Pipelines
This paper highlights the differences between onshore and offshore pipeline design. It then summarizes the results of combined external pressure, tension, and bending testing on full scale...
Extreme Wave-Force Calculation Procedure for 20th Edition of API RP-2A
The paper describes the revised guideline design wave force calculation procedure approved for the 20th edition of the API-RP2A WSD and the first edition of the API-RP2A LRFD and contrasts...
A Simple Model to Predict Soil Resistance to Driving for Long Piles in Deepwater Normally Consolidated Clays
As the exploration and development for offshore oil and gas reserves moves into the deepwater environment of the continental slope, a good model is necessary to evaluate drivability of...
Radial Flow Consolidation Testing
A radial flow consolidation cell that can be used with commercially available loading frames was developed and a series of tests were performed on samples of sedimented kaolin. Simple...
Axial Load Capacity of Pipe Piles in Sands
The axial load capacity of driven, open-ended, steel pipe piles in cohesionless soils, is often estimated using a method such as the American Petroleum Institute Recommended Practice 2A...
Behaviour of Open-Ended Pipe Piles in Sand During Installation and Loading
An experimental study was performed to investigate the physical processes which influence the axial load capacities of open-ended steel pipe piles in sand. A double-walled pipe pile was...
Performance of Suction Caissons in Sand and Clay
The use of suction caissons (suction piles) in marine environments has been increasing in the last decade. A suction caisson is a steel pipe with an open bottom and a closed top that is...
Pile-Driving Formulas for Friction Piles in Sand
Dynamic pile-driving formulas are widely used in predicting the load-carrying capacity of friction piles and in writing pile-driving specifications. Further, when load tests are available,...
Axial Capacity of Steel Pipe Piles in Clay
Development of theories for the prediction of the axial compressive and tensile load capacities of driven piles is made difficult by a variety of factors, e.g., disturbance of the soil...
Application of Model Pile Tests to Axial Pile Design
Experiments conducted with instrumented model pile segment probes at Harvey and Empire, Louisiana are summarized and the observed behavior interpreted. Correlations are developed for the...
Case Study of Offshore Pile System Reliability
This paper presents the results of research effort to evaluate the reliability of offshore pile foundation systems. It is an extension of previous work by the authors [14] dealing with...
Reliability and Resilience � Essential Ingredients of Sustainable Geotechnics
Sustainability of a system is its ability to survive and retain its functionality over time. In very simple terms, sustainability deals with the capacities (resistances) and demands (loads)...
Strategies for Building and Sustaining a Successful Engineering and Consulting Company
This third article in the Business of Geotechnics series addresses stragegies for building and sustaining an engineering and consulting (E&C) company that employs geoprofessionals....
Good Clients, Good Procurements, and the Importance of Quality Work
This fourth article in the Business of Geotechnics series addresses a number of topics related to engineering and consulting (E&C) firm clients and obtaining work from them. The...
People Matters � Building Careers and Developing Leadership
This fifth article in the Business of Geotechnics series addresses personnel matters in private-sector engineering and consulting (E&C) firms. I'll be discussing the...
Is There a Movement Toward Three-dimensional Slope Stability Analyses?
Over the past few years, interest in performing three-dimensional (3-D) slope stability analyses has surged. An increasing number of research papers on this topic are being published at...
2012 Geo-Wall Competition
Highlights from the Geo-Wall Competition at the 2012 Geo-Congress. Teams from 17 universities competed to construct a model mechanically stabilized earth (MSE) retaining wall out of craft...
A Rocky Road Ahead
Companies that offer business consulting services to engineering, architecture, and construction firms-and some of those firms themselves-foresee a difficult year ahead as the economy...
Minimum Design Loads for Buildings and Other Structures
Static Cone to Compute Static Settlement over Sand
(Originally published in
Return to search