Toward a Unified Approach to Anchorage in Reinforced Concrete Design
The introduction of rationalized design procedures for cast-in and post-installed anchors inEurope and the U.S. was intended to provide a uniform factor of safety for anchorages inconcrete,...
Structural Condition Assessment
In Structural Condition Assessment, editor-in-chief Robert Ratay gathers together the leading people in the field to produce the first unified resource on all aspects of structural condition...
Reinforced Concrete Beam: Introduction
This chapter introduces the subject of reinforced concrete beams....
Reinforced Concrete Beam
This chapter discusses the tabulation of reinforced concrete beams data in Microsoft Excel....
Concrete Shear
This chapter discusses the tabulation of concrete shear data in Microsoft Excel....
Concrete Biaxial Column: Introduction
This chapter introduces the subject of concrete biaxial columns....
Concrete Biaxial Column: Composite Circular Column
This chapter discusses the tabulation of composite circular column data in Microsoft Excel....
Concrete Biaxial Column: Partial Shell
This chapter discusses the tabulation of partial shell data in Microsoft Excel....
Concrete Biaxial Column: Photographs
This chapter includes photographs of concrete biaxial columns....
Reinforced Concrete Beam
This chapter discusses the tabulation of reinforced concrete beam data in Microsoft Excel....
The New Tacoma Narrows Suspension Bridge Introductory Project Information
On September 25, 2002, Notice-to-Proceed for a design-build agreement was issued by the Washington State Department of Transportation (WSDOT), directing Tacoma Narrows Constructors (TNC),...
New Shear Stud Provisions for Composite Beam Design
The 2005 American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 2005) will contain significant changes to the shear connector provisions for...
Zemmouri, Algeria, Mw 6.8 Earthquake of May 31, 2003
Prepared by the Earthquake Investigations Committee of the Technical Council of Lifeline Earthquake Engineering ASCE. This TCLEE Monograph summarizes...
Toronto Takes Off
Travelers using Toronto's Pearson International Airport will soon be passing through a new, state-of-the-art terminal, the centerpiece of a 10-year airport redevelopment project....
Life-Cycle Environmental Accounting and Decision-Making for Bridge Structures
This presentation focuses on life-cycle environmental accounting and decision-making for bridge structures using the example of steel and steel-reinforced concrete....
Torsion of Reinforced Concrete -A Historical Overview
The story of torsion of reinforced concrete must start with the French professor, C. L. Navier. In his landmark book (Navier, 1826) he rigorously derived the first rational theory for...
Overview of Structural Behavior of Members Subjected to Torsion
The torsion strength of concrete beams depends on many factors, such as the amount of reinforcement, the volumetric ratios of longitudinal and transverse steel bars, the concrete strength,...
Advances in Analytical Modeling of Torsional Members
The basic formula for calculating the torsional strength of reinforced concrete members was developed by Rausch (1929) using the space truss concept. Unfortunately, Rausch's equation may...
Members Subjected to Torsion Combined with Other Actions
The combination of torsion with bending and shear (T-M-V) in members with both transverse and longitudinal reinforcement is the most commonly encountered combination in practical cases....
Detailing and Design Examples for Torsional Members
The nature of the internal force flow in a concrete member subject to torsion brings about both longitudinal and transverse force components. The resulting tension brought about by the...
Return to search