Failure Modes of Flat Bottom Vertical Storage Tanks
Flat bottom vertical storage tanks are important components in essential nuclear power plant safety systems. Data on the seismic capacity and failure modes of such tanks have been identified,...
Cold Regions Engineering
This proceedings consists of papers presented at the Cold Regions Engineering Specialty Conference held in West Lebanon, New Hampshire from February 26-28, 1991. The papers cover nine...
The Growing Meet Market
The Delaware cities of Dover and Wilmington are only 5 mi apart. Their combined populations barely exceed 100,000. Yet each city is planning to build a new convention center to corner...
A Computerized Completion
The original designers of the 1.6 million sq ft Fillmore Center in San Francisco (its largest mixed-use development project in 20 years) had specified a large amount of steel reinforcement...
The Human Factor in Failures
Human shortcomings cause three-quarters of project failures. A study of 500 case histories led to this assumption. One such failure at the Walter Bouldin dam in Alabama, is described in...
Beyond Engineering: The Politics of Maracaibo
The Lake Maracaibo Bridge in Venezuela was built in 1959. It ranks as one of the largest and longest bridges in the world at the time it was built and contained the longest concrete cable-stayed...
Approximate Methods of Structural Analysis: Principles and Pitfalls
In this modern age when the trend in structural engineering and structural engineering education is to make more and more use of computers and standard structural analysis programs, there...
Structural Approximations in Multi-Story Buildings
Simplified computer analyses and various approximate hand calculation methods are extremely valuable in structural engineering for multi-story buildings both during the preliminary design...
Wind Frame Design for Mid Rise Buildings
A brief discussion of drift limits is followed by design procedures for unbraced moment resisting wind frames and initial selection of optimized member sizes for chevron bracing frames....
Simplified Second-Order Inelastic Analysis for Steel Frame Design
Several current approaches are outlined that account for the spreading of plasticity in a second-order inelastic analysis of frames. The approaches are based on modifications to the simple...
The Boundary Element Method in Engineering Practice
The boundary element method (BEM) provides an excellent basis for the development of integrated design and analysis systems. The technique possesses the advantages of simple model generation,...
Verification of Advanced Analysis Techniques
As a designer there is a concern over the complexity of analysis required by design specifications and building codes because it forces engineers into types of analysis for which many...
Analysis and Design of Structures with Outrigger Arms
Although sophisticated computer methods are available for analyzing an entire building structure, there is a need for simplified methods (a) for checking the accuracy of the computer analyses,...
Verification of Approximate Methods of Structural Analysis
Sophisticated computer programs for the determination of the effects of instability on the inelastic stress resultants in steel structures will appear to be 'black boxes'...
Certifying the TN-BRP and TN-REG Transportable Storage Demonstration Casks
The U.S. Department of Energy (DOE) has obtained U.S. Nuclear Regulatory Commission (NRC) certification to transport two transportable storage casks for a demonstration project. Because...
Controlling the Description of a High-Level Radioactive Waste Isolation System
Control of large, complex, regulation-driven programs using traditional management methods has not been wholly effective. What is needed is a rigorous yet flexible method that is amenable...
Strain Distribution in Fault Zones and Fluid Flow
Field and laboratory studies have shown that mechanical shearing in fault zones produces a repeatable fabric that changes with increasing shear strain. In the brittle field of mechanical...
Compilation/Validation of Thermodynamic Data for Plutonium for Nuclear Waste Disposal: 1. Preliminary Results
A provisional thermodynamic database for plutonium has been compiled from a review of available data and other critical compilations. The database was compared to tabulations of Gibbs...
Predicted Thermal and Stress Environments in the Vicinity of Repository Openings
An understanding of the thermal and stress environment in the vicinity of repository openings is important for preclosure performance considerations and worker health and safety considerations...
Disposal of Vitrified Waste in an Unsaturated Environment
An experimental program is described wherein the effect of important independent variables on glass reaction under conditions that may exist for unsaturated storage is examined. The effect...
Return to search