An Expert System for Stop-Controlled Intersection Design
In 1915, the first stop sign was installed in Detroit, Michigan, but until now, there was still no one coordinated body of knowledge which would dictate design and analysis requirements....
Tutorial on Computer-Aided Design
These tutorial sessions are designed to provide a basic introduction to the use of Computer-Aided Design/Drafting (CAD) in transportation engineering, with particular regard to Civil Engineering...
Trip Generation Analysis by Artificial Neural Networks
A new approach for conducting trip generation analysis based on the concepts of artificial neural networks is presented in this paper. First, a brief introduction to the concepts of artificial...
The Use of Linked Spreadsheets as a Transportation Problem Solving Tool
Spreadsheet modeling is a useful tool for business as well as engineering applications. Until the advent of linked spreadsheets this type of modeling was based on the concept of preparing...
A Peak Hour High Capacity Reservation and Person-Based Functional Classification Concept for Urban Mobility Plans and Corridor Growth Management
The management of future growth and mobility in urban corridors and areas has been based in part upon use of the Levels of Service and procedures of the Highway Capacity Manual. Capacity...
Assessment of the Potential for Tectonic Fault Rupture for High-Level Nuclear Waste Repositories
Active faults that extend to or near the Earth's surface may threaten the safety of engineered structures. The threat can be mitigated by appropriate siting and design, which requires...
Engineering: Environmental vs. Developmental Goals
The 1992 winner of the Daniel W. Mead Student Paper competition explores the potential conflict for engineers, between environmental and developmental goals. Noting a dictionary definition...
Data Validation Practices and Risk Assessment
The accuracy of environmental site assessments depends on the validity of the data used to make them, but all too often, the people who judge the quality of the data have little idea of...
Banking on a Bridge
Completing the geotechnical design for the approach embankments and foundations for the Charter Oak Bridge, which crosses the Connecticut River between Hartford and East Hartford, Conn.,...
Seismic Design Criteria for Transporation Structures
Presented is a discussion focusing on two critical issues which must be resolved when setting seismic design criteria for important transportation structures such as those supporting elevated...
Data Base for Seismis Rick Assessment in Mexico City
We describe a model to estimate expected ground motions and expected damage, based on intensity damage relations derived for 14 classes of buildings representative of Mexico City construction....
Three-Dimensional Simulations of Ground Motions in Sedimentary Basins
This report describes work being done at the U.S. Geological Survey on 3-D simulations of earthquake ground motions in sedimentary basins. The ultimate goal of this research is to predict...
Damage Assessment for Reinforced Concrete Buildings with Shear Walls
This paper tries to establish the analytical method of damage assessment for R.C. buildings with shear walls before or after earthquake. Incremental nonlinear spectrum analysis, using...
Code Provisions for Unreinforced Masonry Bearing Wall Buildings in California
Prior to the Long Beach earthquake of 1933, unreinforced masonry (URM) construction was usual in California, as it still is in many areas of the United States. The poor performance of...
Fundamental Issues in Seismic Safety in Midwestern U.S. Due to Hazard/Vulnerability Relation
Problems in establishing and mitigating seismic risk in urban areas when seismicity is not confidently based on instrumental records are discussed. Urban Southwestern Ohio is a specific...
Things That Fall?Lessons from Some Construction Accidents and Structural Failures
The causes and results of several construction accidents are reviewed. The lessons to be learned from such a summary are that all too often the simplest oversight leads to catastrophic...
Mitigation of Wind-Created Risks During Construction
Wind damage to structures during construction has been found to be significant and often catastrophic. Structural failures are often the result of wind loads that are far less than the...
Bridge Management Research Needs
The present article deals with some aspects of bridge management of particular interest to bridge engineers and to bridge users at the moment. It addresses questions such as life-cycle...
Seismic Assessment and Renovation Study for Highway Bridges
This paper is concerned with hazards mitigation on highway bridges due to earthquake ground motions. Damage to transportation systems may occur if the acting faults of May-Shan and Tsu-Kou...
MRT Cable Supported Roof
A cable supported roof structure for Chientan station (R18A) at Taipei Mass Rail Transit system's Tan-Sui line are under construction. Unique wind and cross sectional dynamic effect has...
Return to search