Sacramento Drainage Manual?Hydrologic Procedures
For a period of over two years, HDR Engineering, Inc. (HDR) and HYDMET have been working with the City and County of Sacramento to develop a Drainage Manual. This Manual contains seven...
Sacramento Hydrologic Procedures Interim Adoption
In November 1989, the County and City of Sacramento jointly undertook the development of a manual for the design of drainage and flood control facilities in the region. Significant technical...
Linear Pertubation Model: An Application to Tanzanian Catchments
Floods are still a problem to many countries in the world todate. Floods do cause damage to property and sometimes loss to human life. Flood control measures by structural and non-structural...
Large Flood Plains Modeling by a Cell Scheme: Application to the Pantanal of Mato Grosso
The computational modeling of large flood plains presents difficulties related to the mathematical approach of the phenomenon and also to the discretization of the area under study. In...
A Frost Protection Design for Fruit Trees in Southwest Colorado
The project explores the feasibility of producing commercial quantities of fruit in the high and arid environment of Southwestern Colorado by using low-volume water delivery systems for...
Computerized Irrigation Project Earthwork Design
A procedure was developed to perform earthwork optimization and land-leveling design for irrigation projects using aerial photogrammetry, a microcomputer and civil engineering computer...
A Framework for Integrating NPS Pollution Prevention and Optimal Perennial Groundwater Yield Planning
Water management agencies are responsible for protecting and guaranteeing the sustained availability of groundwater of adequate quality. The presented procedure helps determine water Best...
Design and Management of Evaporation Ponds
The evaporation ponds in use in the San Joaquin Valley were designed and constructed to dispose of agricultural drainage water in a region of low soil permeability and high water table....
Stable Slopes of Alluvial Channels
An alluvial channel responds to the variation in the incoming sediment by changing its cross-section and especially the slope. Regime relations formulated by Lacey (1930) and many subsequent...
Testing of Outlet Works Emergency (Guard) Gates Under Unbalanced Head Conditions ? Background and History
The U.S. Bureau of Reclamation has responsibility for ensuring the proper operation, maintenance, and safety of over 300 dams and reservoirs throughout the 17 Western States. Storage of...
Development of Test Procedures for Unbalanced Head Operation of Slide Gates
This paper will discuss the steps taken by the Bureau of Reclamation to develop a standardized procedure for testing unbalanced head operation of high-pressure slide gates for outlet works...
Testing Outlet Works Gates and Valves at USBR Dams Under Unbalanced-Head Conditions: Tieton Dam Unbalanced-Head Gate Test
The Tieton Dam outlet works installation geometry is the most common type used in U.S. Bureau of Reclamation (USBR) earthfill dams. An emergency guard gate is located in a gate chamber...
Testing Outlet Works Gates and Valves at USBR Dams Under Unbalanced Head Conditions: Close-coupled Guard and Regulating Gates at Yellowtail and Flaming Gorge Dam
Part of the U.S. Bureau of Reclamation (USBR) program for unbalanced testing of outlet works guard gates and valves at its dams involves testing facilities with 'close-coupled' guard and...
IRRICAD ? Computerized Irrigation Design
IRRICAD is a software program that helps irrigation designers by using a computerized systems approach to design. The program features drawing CAD input, interpolation of elevation data,...
FLUME 3.0: A Computer Program for Designing Flumes and Weirs
Long-throated flumes and broad-crested weirs are becoming the preferred measuring devices for use in irrigation canals. A computer program for calibrating these flumes and weirs has been...
BASIN 2.0 for the Design of Level-Basin Irrigation Systems
The purpose of this paper is to present a computer program for the hydraulic design of level-basin irrigation systems. The first of three design modes provides design based on the advance...
CPIVOT v 2.0 Center Pivot Analysis and Design Software
A micro-computer based software package is presented which can be used for hydraulic design and/or analysis of center pivot irrigation systems. The software is written in C and requires...
Flow Simulation for Surface Irrigation Design
Experience shows that even the most sophisticated and accurate computer models of the surface-irrigation process will not be widely used by design agencies unless they manifest a certain...
Getting Along: The Geotech and the CM
The opinions of geotechnical engineers are usually respected within a consulting firm, but when such a specialist gets out in the field, he or she is seen as merely part of the backup...
Lead is a Four-Letter Word
New regulations and strict enforcement make it difficult and expensive to remove lead-laden coatings from steel structures. Lead-based primers and paints are not considered hazardous as...
Return to search