Stabilization of a Permafrost Subsidence in the Airport Runway at Bethel Alaska
During the construction of the extension to the Bethel Airport runway in 1969, it was necessary to construct a fill across a small gully. The subbase material in the gully contained some...
Design Evaluations in Support of Offshore Facilities and Gravel Islands in the Arctic
Development of oil resources in Northern Alaska has involved the design of nearshore and offshore facilities and structures in the Beaufort Sea and Prudhoe Bay in water depths ranging...
Lessons Learned From Examination of Membrane Roofs in Alaska
During 1984 and 1985 airborne infrared roof moisture surveys were conducted of membrane roofs at Army installations in Alaska. Many of these roofs were also visually inspected and cored...
Snow Load Design for Colorado Mountains
During the past decade, Colorado mountain construction has experienced a period of rapid growth. New ski resorts and other business developments have resulted in many new facilities. For...
An Economical Approach to Receiving Coal by Rail in the Sub-Arctic Environment
During the period 1983 to early 1985 a multimillion dollar coal transfer facility was designed and constructed in Seward, Alaska. The facility transfers coal from rail cars to temporary...
Finite Element Modelling of Cold Regions Concreting
Finite element heat transfer computer programs are discussed in regard to their use in modelling cold weather concreting. The concrete material properties required for input to the finite...
Moisture Effects on Extruded Polystyrene Insulation
The amount of moisture within the insulation was determined by carefully weighing each sample and then measuring its volume. Two methods of measuring thermal conductivity were used. The...
The Evolution of a Factory Insulated Piping System
This paper reviews the developments over the past fifteen years in a factory insulated high density polyethylene piping system that has become a standard for sewage and water piping systems...
Insulation Performance Beneath Roads and Airfields in Alaska
Evaluations of the long-term thermal performance of installations in Alaska for frost heave control have included sampling and testing of the insulations to determine the retained thickness,...
Structural and Architectural Maintenance Management by Micro-computer
When a new Senior Vice-President for University College, the nonmedical portion of the University of Alabama at Birmingham, was appointed in 1984, one of the problems encountered by the...
How To Design Highway Retaining Walls?A Practical Application of CADD
The recent work developed at the University of Missouri-Rolla (UMR) including optimization algorithms and two computer programs, ODSEWS-2D-II and ODRESB-3D are discussed. Several numerical...
Computer Aided Structural Analysis
Computer Aided Structural Analysis (CASA) is an interactive computer graphics program designed to solve two dimensional structural analysis problems. CASA is currently used by the Department...
Interactive CAL Modules for Mechanics of Solids
Traditionally the basic engineering course in 'Mechanics of Solids' has proven to be a challenge to both the students and faculty, for although the fundamental...
Reflections on the Impact of Computer Science on Engineering
Over the past several decades, the use of computers in engineering has grown significantly. Over this same time period, work in the relatively new discipline of Computer Science has impacted...
A Perspective on Engineering Computing
Computing in engineering seems to be evolving very rapidly and yet the data shows that it frequently takes twenty years before a viable concept becomes widely available. Economics is the...
Innovative Solutions to the Challenges of Heavy Civil Projects
Each heavy construction project presents unique conditions and challenges. For large projects, the work scope may justify an extensive engineering analysis and significant investments...
Failure Investigations for Forensic Engineering
Failure investigations related to construction Industry is described in detail in the article. A failure investigation is one of the most demanding of engineering undertakings. It requires...
What to Do When a Failure Occurs
When a major building problem involving structural failure occurs, action should begin immediately to determine the damage or failure and detect the underlying problem. This paper will...
Future Containerships from a Ship Owner's Viewpoint
This paper is a presentation of the author's projection of size and design constraints of future containerships. There is a discussion of containers and on-deck container...
DAPS: An Expert System for Damage Assessment of Protective Structures
An automated reasoning code for the damage assessment of protective structures (DAPS) is being developed within the Air Force. Protective structures in this context will be synonymous...
Return to search