On Measurements of Particle Spinning Motion
Investigation of particle saltation motion is crucial to the development of the theory of bed load transport. Due to the combination effects of the bed roughness and the velocity gradient,...
Application of a Needle Probe in Measuring Local Parameters in Air-Water Flow
In this paper, development of a double needle probe for measuring local parameters in air-water mixtures is explained. This probe is designed to measure flow velocities up to 10 m/s and...
Hydrodynamic Forces in Hydraulic Jump Stilling Basins
The knowledge of hydrodynamic forces acting on hydraulic jump stilling basin slabs has been a research topic for the past four decades. Published methodologies for computing the hydrodynamic...
Measurements of the Hydrodynamic Lift and Drag Forces Acting on Riprap Side Slope
Direct measurements have been made of lift and drag forces acting on a 20.1 mm spherical particle placed within the riprapped 1.5 H: 1 V side slope of a 10 m long channel which was protected...
Eliminating Water Column Separation and Limiting Backspin at a 12,000-Horsepower Pumping Plant
Milwaukee's Water Pollution Abatement Program includes a deep tunnel system which collects combined sewage and street runoff during storms for later treatment when capacity is available...
Pressure-Time Flow Rate in Low Head Hydro Plants
Very few methods are accepted for measuring the flow in the large intakes typical of low head, run-of-the-river hydro plants. These intakes are characteristically short, non-uniform, non-prismatic,...
The Use of Piezoelectric Film in Cavitation Research
A research program was conducted at the St. Anthony Falls Hydraulic Laboratory to investigate impulse pressures caused by the collapse of transient cavitation bubbles. The impulse pressures...
Non-Intrusive Experimental Setup for Inflatable Dam Models
A method which allows for a non-intrusive evaluation of the dynamic response of the inflatable dams under overflow and impounding water conditions is presented. The internal pressure variations...
A Computer-Controlled, Precision Pressure Standard
The operating principles as well as the technical aspects of the implementation of a precision pressure standard are presented here. The instrument can have dual use: either as a pressure...
Nonlinear Hydrodynamic Pressures on Arch Dam Faces
A finite difference method was used to calculate the nonlinear hydrodynamic pressures on the rigid arch dam faces. The arbitrary reservoir shapes were transformed to a regular cubic by...
Estimation of Spillway Free Jet Trajectory Lengths
The design of high head spillways with flip bucket terminal structures must include analysis of the length of the free jet issuing from the spillway. Prototype jet trajectory lengths are...
Force and Pressure Measurements in Spillway Plunge Pools
Plunge pools are often used to dissipate energy from high head spillways with flip bucket terminal structures. Conventional design of plunge pools has been based on a program of mobile...
Fluvial Hydraulics of Streams and Mountain Rivers with Mobile Bed
The local hydraulic conditions concerning the incipient motion of the bed material in mountain streams are considered. Results of measurements carried out by using the radioisotope tracer...
Analysis of Selected Prototype Wave and Runup Data
An investigation of wave runup using video camera technology at Duck, N.C. is discussed. Results are provided from a subset of the runup experiment and wave runup level probability density...
Stochastic Control With Bounded Sample Paths: An Application to Reservoir Systems
The consideration of at least the first two statistical moments for the storage volumes of a reservoir system is crucial in an analysis aimed at determining the optimal operations policies...
Scour Hole Depth Downstream of the SAF stilling Basin
A Model to predict the maximum local scour depth downstream of the SAF stilling basin is presented. The model is based on stability analysis of a particle attacked by the hydrodynamic...
Investigation of an Anisotropic k-? Model
In this paper the eddy viscosity hypothesis is abandoned and explicit expressions of Reynolds stress are deduced directly from the transport equations. Anisotropic k and ? equations are...
Considerations in 2-D Modeling of Hydraulically Steep Flow
Simplifications in the equations used to describe shallow water flow lead to some difficulties in modeling supercritical flow. The hydrostatic assumption produces two significant differences...
Spatial, Lattice and Tension Structures
This proceedings,
Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD)
This publication, Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD), (ASCE 15-93), is applicable to buried concrete precast pipe intended...
Return to search