The Waste Isolation Pilot Plant (WIPP) Integrated Project Management System
The Waste Isolation Pilot Plant (WIPP), located 26 miles east of Carlsbad, New Mexico, is a research and development project of the Department of Energy (DOE), tasked with the mission...
Recent Management Experience of UK Performance Assessments of Radioactive Waste Disposal
The approach to management used over the past decade by a UK Government regulatory body (HMIP) to develop, test and apply integrated risk assessment methods, using a team of private contractors,...
Human Factors Engineering Applications to the Cask Design Activities of the Civilian Radioactive Waste Management Program
The use of human factors engineering (HFE) in the design and use of spent fuel casks being developed for the Department of Energy's Civilian Radioactive Waste Management Program is addressed....
Optimizing Human Reliability: Mock-Up and Simulation Techniques in Waste Management
This presentation describes an ongoing effort to incorporate human factors principles into the design and process development for waste management programs at a nuclear weapons plant....
Impact of Staffing Parameters on Operational Reliability
This paper reports on a project related to human resource management of the Department of Energy's (DOE's) High-Level Waste (HLW) Tank program. Safety and reliability of waste tank operations...
Simulated Hanford Waste: A Study of Physical Properties, Gas Retention, and Gas Generation
This study helps to establish the physical and chemical processes responsible for the generation and retention of gases within high-level waste contained in Tank 101-SY on the Hanford...
Assessments of System Impacts of Spent Fuel Thermal Characteristics and Emplacement Rates
Analyses conducted to evaluate the impacts spent fuel thermal characteristics and emplacement rates might have on the thermal conditions in a candidate geologic repository at the Yucca...
Trying to Make an Unwanted Facility Palatable
Finding suitable accommodations for the temporary storage and permanent disposal of this nation's low- and high-level radioactive waste is proving an ever more difficult task in this era...
Using Co-Management in a Voluntary Hazardous Waste Facility Siting Process
The recent approval for construction and operation of a hazardous waste management facility in Manitoba, Canada is an example of a siting process that is voluntary and that gives the community...
Use of Coupled Geochemical and Transport Calculations for Nuclear Waste Problems
The dissolution and migration of radionuclides from a final repository for radioactive waste is complex chemically. The dissolution and release rates depend on the chemistry and on advective...
Integrated Test Evaluation Decision Framework for the Yucca Mountain Project
An Integrated Test Evaluation decision framework and computer model were developed to help prioritize site-characterization tests at Yucca Mountain. An initial application of the framework...
Roadmapping: A Management Tool
Roadmapping is a process used by the U.S. Department of Energy (DOE) Office of Environmental Restoration and Waste Management (EM) to illustrate issue-based planning activities necessary...
Crisis Management Training at Nuclear Facilities: Simulations in Bomb Threats
Substantial enhancements to the study of the theoretical and applied foundations of crisis management have been achieved in recent years. Whereas risk managers study 'the probability that...
Software Quality Assurance on the Yucca Mountain Site Characterization Project
The Yucca Mountain Site Characterization Project (YMP) has been involved over the years in the continuing struggle with establishing acceptable Software Quality Assurance (SQA) requirements...
Qualification of Existing Data for the Yucca Mountain Site Characterization Project
The U.S. Department of Energy (DOE) has completed its first effort to qualify existing data using NUREG-1298 'Qualification of Existing Data for High-Level Nuclear Waste Repositories'....
Yucca Mountain Site Characterization Project Performance Based Q List
In mid-1992, the Yucca Mountain Site Characterization Project (YMP) initiated a performance based 'Q' List development effort. This effort is intended to evolve a 'Q' List based upon the...
Development of the Office of Civilian Radioactive Waste Management's Self-Assessment Program
This paper describes the development and implementation of the Self-Assessment (SA) Program of the Office of Civilian Radioactive Waste Management (RW). The basis for RW's SA program is...
Potential Nuclear Material Safeguards Applied to the Department of Energy's Civilian Radioactive Waste Management System
The Office of Civilian Radioactive Waste Management (OCRWM) within the U.S. Department of Energy is charged with the responsibility of safe and efficient disposal of this Nation's civilian...
Safeguards Issues of Radioactive Wastes at DOE Sites
Radioactive waste management is not regarded as a safeguard-sensitive step in the nuclear fuel cycle. However, the accumulation of large amounts of fissile materials in wastes over a period...
Safety Envelope Input: Nuclear Facility Isotopic Content (NFIC) Management System
The Westinghouse Savannah River Company (WSRC) is aggressively applying environmental remediation and radioactive waste management activities at the U. S. Department of Energy's (DOE)...
Return to search