ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Overview of Permeable Bases
Drainable pavement systems consist of: permeable base, separator lyer, and edgegrain system. This paper focuses on permable bases. A permeable base must provide both permeability and stability....

Consistency and Fairness in Geotextile Specifications
By clearly defining required material properties in terms of 'Minimum Average Roll Values' for routine quality control tests and 'Average Test Values in the Weakest Principal Direction'...

Performance of Epoxy-Coated Steel in Continuously Reinforced Concrete Pavement
Two sections of interstate highway in central Oklahoma were recently reconstructed. On both projects, northbound lanes were reinforced with epoxy-coated steel and southbound lanes were...

High Strength, Low Permeability Garage Rehab Concrete
Physical and engineering properties of high strength structural lightweight concrete used to replace deteriorated concrete in garage structure rehabilitation programs are reported. Structurally...

Properties of Composites Using Recycled Plastics
Recycled poly(ethylene terephthalate), PET, mainly recovered from used plastic beverage bottles, can be used to produce unsaturated polyester resins. Polymer concrete (PC) and polymer...

Concreting at Subfreezing Temperatures
Temperature affects the rate at which portland cement concrete develops strength. Below about 20?C, strength gain is retarded, whereas at higher temperatures it is accelerated. Strength...

Aerogel?A Transparent, Porous Superinsulator
Silica aerogel is an unusual, transparent, low density, thermally insulating solid useful for a variety of applications. We have been investigating silica aerogel for use in transparent...

Implementation of Material Requirements in Specifications
This paper focuses on where to find information on materials, their compatibility, minimum standards and specifying of materials and their use. The paper also presents case histories on...

Performance of Free Draining Base Course at Fort Campbell, Kentucky
In 1990 a free draining base course layer was constructed in the structural section of a pavement to be used as a military vehicle maintenance yard at Port Campbell, Kentucky. The Corps...

Physicochemical and Rheological Properties of Microwave Recyled Asphalt Binders
The purpose of this study was to analyze microwave recycled asphalt binders using Gel Permeation Chromatography (GPC), Fourier-Transform Infrared Spectroscopy (FTIR), and Dynamic Mechanical...

Investigation of Concrete at a Middle East Plant
In recent years, reinforced concrete construction in the Middle East has been beset by durability problems. The causes include availability of a limited number of skilled workers, marginal...

Innovations for NDT of Concrete Structures
The proposed paper presents three recent innovations for sonic and ultrasonic Non-Destructive Testing (NDT) of concrete structures which greatly increase the utility and speed of many...

Composites Performance in the Infrastructure
Fiberglass reinforced plastics (FRP) composites have been used in demanding structural applications, mostly for special corrosion resistant construction products, for several decades....

Unidirected Twined-Strand Composites and Their Uses
Twined strand composites are a new class of unidirected continuous-fiber-reinforced composite materials where the orientation of the continuous fibers is a twine of unidirected helically...

Adhesives and Structural Plastics
An overview of some primary considerations for the use of adhesives and their advantages in connection of structural plastics is presented. Effective joint geometries, surface preparations,...

Full Scale Tests on Concentrically Loaded Fiber-Reinforced Pultruded Columns
This paper briefly reports on the experimental investigation in connection with the short term behavior of pultruded structural members under concentric loading. In particular, results...

Experimental Investigation of Self-Tapping Fasteners for Attachment of Corrugated Cladding Panels to Pultruded Fiber-Reinforced Plastics Beams in Industrial Building Construction
This paper describes an experimental investigation of self-tapping fasteners for the attachment of corrugated fiber-reinforced plastics (FRP) cladding panels to pultruded FRP beams. Although...

Polyolefin Plastic Water Service Line Performance
Polyolefin (PO) plastic piping made from polyethylene (PE) and polybutylene (PB) materials have been used in diameters of about 1 in. for water service lines for buildings. Both PE and...

Bond Strength of Straight GFRP Rebars
An overview of a study on bond of straight Glass-fiber-reinforced-plastic (GFRP) rebars to concrete is presented. The 54 specimens to be tested include several variables, such as the mode...

Tests of Full-Size Pultruded FRP Grating Reinforced Concrete Bridge Decks
Results of tests of full-size concrete bridge deck slabs reinforced with commercially produced pultruded fiber-reinforced plastic (FRP) gratings are presented. The slabs were designed...

 

 

 

 

Return to search