Advanced HEC-2 Modeling on Forester Creek
The goal of this paper is to share information regarding advanced modelling techniques used to solve complex hydraulic flow issues using the HEC-2 Computer Model (1990). There are several...
Distorted Physical Models for Mixing Studies
The frictional resistance and mixing process affected by roughness bars are investigated. Specific combinations of the size and layout of the bars for various flow conditions are suggested...
Determination of Pulsating Pressures for Baldhill Dam, N.D. Spillway
Model tests of the existing Baldhill Spillway were conducted with symmetrical and asymmetrical gate openings to determine for various flow conditions the characteristics of the hydraulic...
Bridge-Scour Analysis Using the
A program was developed to extract hydraulic information required for bridge-scour computations, from the Water-Surface Profile computation model (WSPRO). The program is written in compiled...
Innovations and Practical Procedures for Hydraulic Model Applications in Bridge Scour Evaluations
Procedures for data conversion, and establishment of downstream boundary conditions for a hydraulic computer model for estimation of riverbed scour at bridges are presented. The data conversion...
Bri-Stars Model for Alluvial River Simulation
The Bridge StreamTube Model for Alluvial River Simulation (BRI-STARS) is a semi-two-dimensional model capable of computing alluvial scour/deposition through subcritical, supercritical,...
Practical Comparison of One-Dimensional and Two-Dimensional Hydraulic Analyses for Bridge Scour
The Kentucky Transportation Cabinet, Department of Highways is working with the Indiana Department of Transportation and the Federal Highway Administration to plan, design, and construct...
Hydraulic Modeling and Mapping of Mud and Debris Flows
The prediction of hyperconcentrated sediment flows on alluvial fans was advanced through the development of a two-dimensional, finite difference flood routing model FLO-2D. The model simulates...
Design of a Curved Baffle Energy Dissipation Structure
A curved baffle energy dissipation structure was designed and constructed based on the results of hydraulic and analytical models. Field tests of the prototype demonstrate close comparison...
Hydrologic Design: Extending Traditional Methods
A review of traditional hydrologic design shows that it is inadequate. The continued adaptation of manual techniques into computer software without a major change in fundamental assumptions...
A New Type of Concrete Trapezoid Dam
A new type of 128.0 m height concrete trapezoid dam (t-d) has been built for the Wunana Town Hydroelectric Power Station (WTHPS). The paper presents its optimum section design, several...
Assessing the True Value of Flood Control Reservoirs: The Experience of Folsom Dam in the February 1986 Flood
Over the last 40 years considerable public investments have been made in large flood control storage reservoirs throughout the U.S. and internationally. These projects were typically designed...
Recent Developments in Three-Dimensional Numerical Estuarine Models
For a fixed cost, computing power increases 5 to 10 times every five years. The readily available computing resources have inspired new modal formulations and innovative model applications....
TRIM?3D: A Three-Dimensional Model for Accurate Simulation of Shallow Water Flow
A semi-implicit finite difference formulation for the numerical solution of three-dimensional tidal circulation is discussed. The governing equations are the three-dimensional Reynolds...
Three-Dimensional Free Surface Modeling (Is There a Best Approach?)
With the increases in computing power, researchers all over the world are developing and applying three-dimensional (3D) hydrodynamic models. The numerical techniques employed are usually...
Galveston Bay 3-D Model Study Channel Deepening Lessons Learned in Management of a Large Modeling Study
The numerical modeling of Galveston Bay in 3-D for long time durations with many geometry and hydrologic scenarios, coupled with the need to store all data for subsequent use in a model...
Probability of Bridge Failure Due to Scouring
Models to estimate depth of scour at bridge piers and abutments are available in many forms,but all of them are based on constant discharges. Their results vary widely and engineering...
Reliability Analysis of Levee System of a River
The levee height is determined by the summation between computed water level and an assumed freeboard. The water level is computed by given discharge in the steady conditions. Therefore,...
Uncertainty Analysis of the FEMA Method for Alluvial Fans
Distributary flow areas such as alluvial fans, bajadas, and alluvial slopes, and alluvial plains along mountain bases pose quite different and interesting problems for the design of hydraulic...
Structure of Coastal Upwelling on a Sloping Bottom
A large eddy simulation of coastal upwelling on a sloping bottom is carried out. The structure of the upwelling consists of a persistent primary front, a temporary secondary front which...
Return to search