Technology Transfer for Projects in South America
Engineering services were provided for three projects in South America. One project was located in the Pampa Region of Argentina and two others in northern Brazil. The projects were: 1)...
Design and Maintenance Factors Affecting Application Uniformity of Low Pressure Center-Pivot Irrigation Systems
Uniformity tests were conducted on 30 center-pivot sprinkler systems installed with one of six different low pressure nozzle types or high pressure impact sprinklers. Well designed and...
Stochastic Simulation and Optimization of Irrigation Canal Network Flows
This paper investigates the effects of parametric and objective uncertainty on simulation and optimal hydraulic design of irrigation canal networks. A model of spatially-varied flow in...
Design of Latticed Steel Transmission Structures
This standard,
Water's New World
Potential applications of computer automation in the water industry have become increasingly apparent in the last several years. A growing number of water agencies are considering purchasing...
Highway Design in 3-D
Limitations in the flexibility and intelligence of commercial roadway design packages led Hart-Freeland-Roberts, Inc., Brentwood, TN, to write its own highway design software. From the...
The Evolution of an Environmental Monitor
After more than 40 years of planning, litigation, design and construction, one of the nation's most controversial highway projects is finished. The completion earlier this...
Taming Tornado Alley
Some structures�such as nuclear power plants�need complete protection from tornadoes regardless of the high costs of design and construction. Public facilities need protection too, but...
Expert Systems: Ready to Hit the Road?
Expert systems, programs that take the rules a person uses to solve a problem and encodes them into a computer, are starting to get serious examination from DOTs around the country. The...
CAD and the Corps
CAD has been a near standard feature of engineering design for the last decade, but the U.S. Army Corps of Engineers has found that the way their installations have gone about designing...
Deep Water Container Wharf & Crane Foundation
A deep water anchored steel bulkhead and a parallel-independent low-profile, pile supported crane rail foundation with special stowage areas are discussed from soils investigation, through...
Case Study ? Elliott Bay Marina Floating Moorage
The recently completed Elliott Bay Marina project in Seattle is one of the larger projects of this type in the country, with 1196 slips ranging from 32 feet to 60 feet, a floating fuel...
Design of Marina Replacement Facilities
A majority of the waterfront design projects within the State of California are for the replacement of existing facilities since the densely populated shoreline areas are already heavily...
Riprap Design in Marine Terminals
Navigation vessels in otherwise quiescent waterways sometimes generate forces that require stabilization of the bed or banks. Since riprap is an accepted and dependable means to armor...
Proposed Seismic Design Method for Piers and Wharves
Current seismic provisions of the 1991 Uniform Building Code (UBC-91) and the 1983 AASHTO Seismic Design Specifications (AASHTO) are compared as they relate to piers and wharves. An alternate...
Seismic Rehabilitation of Seattle's Pier 69
The Port of Seattle, one of the largest on the west coast of North America, made a strong statement regarding their support for reusing existing structures when a decision was made to...
Seismic Survey Considerations in the Planning and Design of Dredging Projects for Marine Terminal Facilities
This paper presents a case study of the value of high resolution seismic survey information when planning and designing a dredging project for a marine terminal facility. Advances in high...
A Computational Berthing Model for the Design of Fender Systems
The IRF numerical model has not been widely applied to the design of fender systems although the method has been extensively confirmed by hydraulic model tests and partially verified by...
Design Criteria for Ferry Landings
This paper describes an ongoing research project conducted by the University of Washington Department of Civil Engineering to develop design criteria for the Washington State Ferry System....
Land Reclamation Design for the Port of Los Angeles' 2020 Plan
In order to meet future cargo demands the Ports of Los Angeles (POLA) and Long Beach in conjunction with the United States Army Corps of Engineers have conducted a long-range planning...
Return to search