Validation of Source-Term Models Using Natural Analogues
A comparison is made between the predicted distribution of copper calculated by the AREST source-term code and the measured profiles for copper surrounding a bronze cannon that was emplaced...
MARNIE, a Near Field Transport Model for Radioactive Waste Repositories
The long term safety of a final repository for radioactive waste disposal has to be demonstrated. A number of scenarios can be postulated that could lead to a considerable release of radionuclides...
Conclusions from Project-90 With Regard to a Regulatory Framework
A five year performance assessment program, Project-90 [1], has been concluded by the Swedish Nuclear Power Inspectorate, SKI. The project was defined to develop independent assessment...
CALIBRE and CRYSTAL: Near-field and Geosphere Models for Project-90
A new near-field model (CALIBRE) and a fractured geosphere model (CRYSTAL) have been developed in support of the Swedish Nuclear Power Inspectorate's Project-90 safety assessment...
Testing of Materials and Scale Models for Impact Limiters
Aluminum Honeycomb and Polyurethane foam specimens were tested to obtain experimental data on the material's behavior under different loading conditions. This paper reports...
GA-4/GA-9 Honeycomb Impact Limiter Tests and Analytical Model
General Atomics (GA) has a test program underway to obtain data on the behavior of a honeycomb impact limiter. The program includes testing of small samples to obtain basic information,...
Comparison of Elastic and Inelastic Analysis and Test Results for the Defense High Level Waste Shipping Cask
In the early 1980's, the U.S. Department of Energy/Defense Programs (DOE/DP) initiated a project to develop a safe and efficient transportation system for defense high level...
An Empirical Data Base for the Investigation of Earthquake-Related Changes in Crustal Hydrology
Both fracture permeability and fluid flow velocity can alter as a result of sudden strain changes associated with earthquake fault rupture. Testing the hydrological signatures of numerous...
Three-Dimensional Groundwater Flow Modelling for a Potential Repository Site
In Finland site investigations are carried out at five places in order to find a suitable site in the Finnish bedrock for a repository for spent nuclear fuel. The aim is to model the bedrock...
Two Double Porosity Models for Groundwater Radioactive Contamination
This paper describes two models for groundwater radioactive contamination in a naturally fractured rock. The first one for a saturated rock and the other one for an unsaturated rock. Numerical...
General Circulation Models: Applications for Nuclear Waste Repositories
Numerical models have long been used to relate causal and response functions in the natural environment. Some 20 years ago, one-dimensional, multi-causal models of earth temperature evolved,...
Preliminary Assessment of the Impact of Conceptual Model Uncertainty on Site Performance
Performance assessment modeling for high-level radioactive waste (HLW) disposal incorporates three different types of uncertainty. These include data and parameter uncertainty, modeling...
A Formalism to Generate Probability Distributions for Performance-Assessment Modeling
A formalism is presented for generating probability distributions of parameters used in performance-assessment modeling. The formalism is used when data are either sparse or nonexistent....
Characterization Uncertainty and its Effects on Models and Performance
Geostatistical simulation is being used to develop multiple geologic models of rock properties at the proposed Yucca Mountain repository site. Because each replicate model contains the...
Toward Linking Demographic and Economic Models for Impact Assessment
One of the objectives of the Yucca Mountain Project, in Southern Nevada, is to evaluate the effects of the development of a high-level nuclear waste repository. As described in the Section...
Interim Waste Storage for the Integral Fast Reactor Fuel Cycle Demonstration
An interim storage system design and operating strategy were developed for implementation in the Integral Fast Reactor Fuel Cycle Demonstration. Waste characteristics and thermal power...
Knowledge Representation for Bridge Design
An implementation of a frame-based knowledge representation language (KRL) for development of expert system applications in highway bridge design is presented. The frame-based KRL is used...
Optimized Models for Predicting Structural Response in Highway Bridges
Optimization techniques are a viable option for modeling bridges that have been field tested. The error between the experimental strains and the analytical strains is minimized by adjusting...
Visualizing the Performance of Structural Optimization Processes
Graphical constructions are discussed that enable the performance of iterative structural optimization processes to be evaluated visually. The first, a basins of attraction construction,...
Integrated Structural Engineering Solution for Design, Drafting and Analysis
Computervision Corporation is a leading CAD/CAM/CAE vendor that offers a complete integrated structural solution to customers. This structural solution allows customers to manage intricate...
Return to search