Debris Flow Initiation and Termination in a Gully
A comprehensive simulation model predicting the debris-flow discharge hydrograph, solids concentration in it and the process of variation of the channel due to vertical as well as lateral...
Hydraulic Modeling and Mapping of Mud and Debris Flows
The prediction of hyperconcentrated sediment flows on alluvial fans was advanced through the development of a two-dimensional, finite difference flood routing model FLO-2D. The model simulates...
Design of a Curved Baffle Energy Dissipation Structure
A curved baffle energy dissipation structure was designed and constructed based on the results of hydraulic and analytical models. Field tests of the prototype demonstrate close comparison...
Evaluation of Hydraulic Structure Reliability Considering Uncertainties in Hydrologic Models
Uncertainties in a hydrologic model give rise to uncertainty in model outputs which, in turn, can be used for reliability-based design and /or evaluation of hydraulic structures. This...
Analyzing Uncertainty of IUH of Nash
Uncertainties in hydrologic modeling are the primary factors affecting the reliability of hydraulic structures. Among various hydrologic rainfall-runoff models for engineering applications,...
Hydrologic Design: Extending Traditional Methods
A review of traditional hydrologic design shows that it is inadequate. The continued adaptation of manual techniques into computer software without a major change in fundamental assumptions...
Importance of Hydraulic-Model Uncertainty in Flood-Stage Estimation
The delineation of the regulatory floodplain and determination of the respective flood stage is subject to hydraulic-model uncertainty in transforming the design discharge into a flood...
A New Type of Concrete Trapezoid Dam
A new type of 128.0 m height concrete trapezoid dam (t-d) has been built for the Wunana Town Hydroelectric Power Station (WTHPS). The paper presents its optimum section design, several...
Recent Developments in Three-Dimensional Numerical Estuarine Models
For a fixed cost, computing power increases 5 to 10 times every five years. The readily available computing resources have inspired new modal formulations and innovative model applications....
TRIM?3D: A Three-Dimensional Model for Accurate Simulation of Shallow Water Flow
A semi-implicit finite difference formulation for the numerical solution of three-dimensional tidal circulation is discussed. The governing equations are the three-dimensional Reynolds...
Parameterization of Turbulence for Three-Dimensional Circulation Modeling
Estuarine circulation are driven by the actions of tide, wind, and density gradients associated with saline ocean water and fresh riverine water, and are also influenced by the complex...
Three-Dimensional Free Surface Modeling (Is There a Best Approach?)
With the increases in computing power, researchers all over the world are developing and applying three-dimensional (3D) hydrodynamic models. The numerical techniques employed are usually...
Galveston Bay 3-D Model Study Channel Deepening Lessons Learned in Management of a Large Modeling Study
The numerical modeling of Galveston Bay in 3-D for long time durations with many geometry and hydrologic scenarios, coupled with the need to store all data for subsequent use in a model...
Probability of Bridge Failure Due to Scouring
Models to estimate depth of scour at bridge piers and abutments are available in many forms,but all of them are based on constant discharges. Their results vary widely and engineering...
Reliability Analysis of Levee System of a River
The levee height is determined by the summation between computed water level and an assumed freeboard. The water level is computed by given discharge in the steady conditions. Therefore,...
Three-Dimensional Variable Resolution Hydrodynamic and Transport Modeling of the Chesapeake Bay System
This paper describes a domain decomposition methodology used in the application of the three-dimensional environmental fluid dynamics code, EFDC, to model hydrodynamics and transport in...
A Finite-Difference Model for 3-D Flow in Bays and Estuaries
This paper describes a semi-implicit finite-difference model for the numerical solution of three-dimensional flow in bays and estuaries. The model treats the gravity wave and vertical...
Horizontal Gradients in Sigma Transformed Bathymetries with Steep Bottom Slopes
Simulation of free surface flow and transport in areas such as seas, estuaries and river is often based upon three-dimensional modelling systems. Common characteristics of these modelling...
2-D Vertical and 3-D Modelling of Mud Transport in Tidal Flows
Model predictions of a fully three-dimensional sediment transport model are presented for two tidal flow variation cases. A simplified two-dimensional form of the model is applied to demonstrate...
Three-Dimensional Numerical Modeling for Transport Studies
Modeling three-dimensional transport of salinity and sediments in estuarine flows requires that hydrodynamics be accurately modeled with sufficient precision to describe the advection...
Return to search