Simple Methods for Design of Steel Gusset Plates
This paper presents two simple methods for design of steel gusset plates. In the first method, the wedge theories are applied to establish state of stress in steel gusset plates. In the...
Notable Unbuilt Bridges
In the examples of unbuilt bridges discussed, many different ideas and concepts have been proposed. Most appear to be basically sound in nature, although rather innovative and daring....
Total Optimization of Truss Considering Shape, Material and Sizing Variables
A total optimum design method is developed for truss structures in which the shape of the structure, discrete material kinds and cross-sectional areas of member elements are optimized...
Plates and Shells with Crack-Like Flaws
The formulation of new hierarchial finite elements for the analysis of laminated plates and shells in the presence of flaws are discussed. The performance of the elements is evaluated...
Polypropylene FRC In Steel Deck Composite Slabs
Engineers, testing laboratories, universities and metal deck manufacturers have studied polypropylene fiber reinforced concrete (FRC) and compared the results with similar slabs reinforced...
Cracking Behavior Comparisons Between Normal and Fiber-Concretes
A comparative study of the cracking behavior of plain- and polypropylene fiber concrete was performed. Both high- and low-strength concretes were studied. Maximum and average crack widths...
High Strength Concrete: Proportioning, Behavior and Applications
Generally, concrete with a cylinder compressive strength higher than 6000 psi (41.4 MPa) is designated as high strength concrete. High strengths are achieved using stronger coarse aggregates,...
Sulfur Polymer Concrete for Special-Purpose Applications
Special-purpose sulfur concrete construction materials, based on sulfur polymer cement (SPC) and mineral aggregate, have been developed by the U.S. Bureau of Mines as part of a program...
Natural Aggregates in Structural Lightweight Concrete
Pumice and scoria have been used in structural concrete since the days of the Roman Empire. Records for the past five decades show minimal use of these materials in structural concrete...
Polymer Concretes
Polymer Concrete (PC) is prepared by using polymeric materials to bond inert aggregates in a fashion similar to that of Portland Cement in the preparation of Portland Cement Concrete (PCC)....
Concrete Lunar Bases
Scientific and industrial operations on the moon require suitably shielded structures. Small structures for limited scientific activities may be constructed from structural elements prefabricated...
Recent Development of Cement-Based Materials
Development of advanced techniques has enhanced the capability of more accurate characterization of engineering materials at both the microscopic and macroscopic levels. Through better...
Review of Composite Analysis Methods for High Temperature Applications
This paper addresses a number of unique problems encountered in the stress analysis of high temperature composite materials. The materials used as structures subjected to temperatures...
Microsilica (Silica Fume) Concrete Durability in Severe Environments
Microsilica (silica fume) concrete has provided increased durability in a variety of aggressive environments. Technical information is presented for microsilica concretes exposed to fire,...
Sulfate Attack on Concrete Containing Fly Ash
The use of fly ash as a portland cement replacement in concrete may provide many technical and economic advantages. One such technical advantage is to improve the resistance of concrete...
Freezing and Thawing Durability of High Strength Silica Fume Concrete
Specimens from 27 batches of concrete with a water to cementitious (cement plus silica fume) ratio of 0.25 to 0.32, with and without entrained air, were tested for freeze-thaw durability...
Fatigue and Fracture Evaluation of Riveted Bridge Members
Among the major concerns of bridge engineers today are the fatigue damages that have been accumulated in riveted members and the safety of riveted structures. Many of these structures...
Fatigue Strength of Corroded Rolled Beams
Highway and railway bridges fabricated from ASTM A7, A36, and A572 steels will corrode if the paint system is allowed to fail for lack of maintenance. Corroding members lose cross section...
Fatigue Behavior of Steel Connection Angles
A method for predicting the fatigue behavior of flange angle elements is presented. The primary emphasis herein concerns an analytical approach for evaluating the fatigue life of flange...
Application of BEM to Two-Dimensional EPFM
This paper describes the authors' current and continuing research in application of the Boundary Element Method (BEM) to crack growth problems in Elastoplastic Fracture Mechanics...
Return to search