Simulation Modeling of Subsurface Development
This paper discusses the use of simulation modeling in analyzing subsurface development activities and estimating associated costs at the Yucca Mountain candidate repository site. Described...
Trends in Waste Management Program Costs: An Evolution of Estimating Methods and Results
The purpose of this paper is to present a summary of how the program cost projections contained in the five TSLCC analyses performed to-date and the estimating methods used to make these...
Facility Interface Capability Assessment (FICA) Project
The U.S. Department of Energy-Office of Civilian Radioactive Waste Management (DOE-OCRWM) is sponsoring the Facility Interface Capability Assessment Project to determine current and potential...
Materials Selection Issues for Structural Components of Transportation Casks
Sandia National Laboratories (SNL) is evaluating the use of alternate materials (i.e. other than stainless steel) as structural components in nuclear spent fuel transportation casks. This...
Programmatic Challenges and the Value of Testing on the West Valley Demonstration Project's Vitrification Facility Design
The primary objective of the West Valley Demonstration Project (WVDP) is the solidification of approximately 2.1 million liters (560 thousand gallons) of high-level waste (HLW) which resulted...
An Overview of the Vitrification of Defense High-Level Waste at the Hanford Site
Nearly 63 percent of the nation's high-level nuclear waste has accumulated at the U.S. Department of Energy's (DOE) Hanford Site in Washington State. This accumulation...
The International Stripa Project: Technology Transfer From Cooperation in Scientific and Technological Research on Nuclear Waste Disposal
The Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD/NEA) sponsors the International Stripa Project. The Stripa Project is open to participation...
The Status of the Site Characterization and Validation Program in Phase III of the OECD/NEA Stripa Project
In 1980, the International Stripa Project was organized under the aegis of the OECD Nuclear Energy Agency for the purpose of conducting research, at the Stripa mine in Sweden, related...
Site Selection Criteria for Constructing an Independent Spent Fuel Storage Installation (ISFSI) at a Commercial Nuclear Power Plant
Commercial nuclear power plants in the U.S. are responsible for providing their own interim storage for excess spent fuel. A facility located onsite, acting as a buffer between in-pool...
Concrete Cask Storage Technology
The paper presents the design and operation of the new dry storage system for nuclear waste. The system was designed by complete nuclear, thermal-hydraulic and structural analysis to the...
Properties of the West Valley Waste Form
The centroid composition of the West Valley Demonstration Project waste form has been selected on the basis of criteria mandating high chemical durability and good processibility. A review...
Computed Distributions of Residual Shaft Drilling and Drift Construction Water in the Exploratory Facilities at Yucca Mountain, Nevada
The Yucca Mountain Project is studying the feasibility of constructing a high-level nuclear waste repository at Yucca Mountain in southwest Nevada. One activity of site characterization...
Research for Final Disposal of Unreprocessed Spent Nuclear Fuel in Sweden
The second Swedish programme on research, development and demonstration in the nuclear radioactive waste management area was submitted by SKB to the Swedish National Board for Spent Nuclear...
Preliminary Conceptual Design Description of the Proposed DOE Store-Only Monitored Retrievable Storage (MRS) Facility
The Nuclear Waste Policy Act (NWPA) of 1982 required DOE to examine the options for the provision of long term spent fuel storage in monitored retrievable storage (MRS) facilities. Specifically,...
Ventilation and Construction Considerations for a High Level Nuclear Waste Repository
The storage of high level nuclear waste in an underground repository presents engineering problems in ventilation, construction methods and plan, and in proposed retrievability. Temperatures...
Case System and Ancillary Equipment Maintenance
Per-shipment activities, incidental maintenance, repair, and routine maintenance for Federal Waste Management System (FWMS) casks and ancillary equipment and responsibility for those activities...
Requirements and Concept for an On-Orbit Construction Facility for Phase 1 Space Station Freedom
Future NASA plans for exploring the solar system and programs such as the Large Deployable Reflector and Pathfinder require in-space construction for their success. The technologies required...
Space Station Freedom Attached Payloads and Commercialization
The Space Station Freedom (SSF) accommodates a class of payloads called external attached payloads. These payloads are attached to the main truss of Space Station Freedom through the use...
Technology Needs Development and Orbital Support Requirements for Manned Lunar and Mars Missions
This paper will present an overview of the critical technology needs and the Space Station Freedom (SSF) focused support requirements for the Office of Exploration's (OEXP)...
MALEO: Modular Assembly in Low Earth Orbit: An Alternate Strategy for Lunar Base Deployment
Modular Assembly in Low Earth Orbit (MALEO) is a new strategy for building an initial operational capability lunar habitation base. In this strategy, the lunar base components are brought...
Return to search