Resonant Column Testing of Dynamic Rock Properties
Critical parameters for geophysical wave propagation studies are the dynamic elastic properties (shear and Young's moduli, and Poisson's ratio) and the intrinsic material damping of rocks....
Effect of Water on the Consolidation of Crushed Rock Salt
The consolidation behavior of crushed rock salt, as the backfill in the under-ground disposal of nuclear waste, will be important in controlling room closure rates and local permeability....
A Wax-Coupled Borehole Seismic Detector for High-Resolution Measurements
A triaxial borehole seismic detector was developed for high-resolution measurements at frequencies up to 2,000 Hz. Applications for this detector include three-component shallow reverse...
A Shear Locking Free Three-Node Triangular Plate Bending Element for Moderately-Thick and Thin Symmetrically Cross-Ply Laminated Plates
A shear locking free three-node triangular plate bending element based on Reissner/Mindlin theory for symmetric general cross-ply laminated plates is developed. The element has total nine...
Ultrasonic Wave Scattering by a Crack in a Composite Plate
A hybrid method is presented for analyzing ultrasonic wave scattering of plane strain waves by a crack in a composite plate. The hybrid method combines a finite element formulation in...
Sensitivity of Lifeline Response to Models for the Spatial Incoherence of the Seismic Ground Motions
The sensitivity of the response of above-ground and buried lifelines to different models describing the spatial variability of the seismic ground motions is examined. It is shown that...
Evolution of Damage in Brazilian Test Using Holographic Interferometry
A common method for estimating the tensile strength of concrete is the Brazilian Test. The test is carried out by loading a cylinder on its side in diametral compression. Accodring to...
Random Initial Heterogeneity and Degradation in Brittle Materials
The question of implementation of the initial state of the material is addressed. The problem is tackled by assuming random initial values for a relevant variable, within a prespecified...
Retrospect and Prospect: Micromechanics
In the mechanics community the term micromechanics is often used to identify scientific efforts in which certain overall macroscopic material response and failure modes are characterized...
Harmonic Excitation of an Unconstrained Saturated Particle Bed
Past research on the flow of concentrated cohensinless mixtures have historically emphasized steady or quasi-steady motions while dynamic effects have received little attention in comparison....
Application of NMR to Rotating Granular Flow
Granular flow in a steadily rotating cylinder, having a large length-to-diameter ratio, is measured by nuclear Magnetic Resonance Imaging (MRI). This non-invasive technique is capable...
Postbuckling Behavior of Stiffened Composite Shell Panels
The paper summarizes the current status of an ongoing study on the postbuckling behavior of thick and moderately thick composite stiffened shells. Axially compressed moderately thick panels...
Dynamic Stability of Composite-Material Circular Cylindrical Shells with Orthogonal Stiffeners
The governing equations are formulated for general (axisymmetric or unsymmetric) vibrations of thin circular cylindrical shells of composite material and reinforced with axial (stringer)...
Updating Dynamic Models and Their Associated Uncertainties for Structural Systems
The problem of updating a structural model and its associated uncertainties using dynamic test data is addressed, considering uncertainties which arise from measurement noise, modeling...
A Hydraulic Study of Venous Valve Closure
The functions of the veins is to convey blood from the periphery to the heart. The distribution and transportation of blood between different parts of the body is regulated by a host of...
Systolic Anterior Motion of the Mitral Valve: In Vitro Flow Studies
Using an in-vitro approach, the goal of this study was to determine and to characterize the mechanism of systolic anterior motion of the mitral valve in obstructive hypertrophic cardiomyopathy....
Intra Vena Cava Balloon Pumping
An innovative prototype intravenous hollow-fiber oxygenator was developed in 1984 by B.G. Hattler. The device consisted of a microporous, hollow-fiber membrane oxygenator inserted into...
An Evaluation Study of Modified Mohr-Coulomb and Cap Models
Two failure criteria, namely Mohr-Coulomb and cap models, are considered in this paper with some modifications. Mohr-Coulomb theory is applied to concrete after stress and strain cut-offs...
Seismic Stability Analysis of Landfill
The failure mechanism of a waste containment system is not well understood due to the complexity and the heterogeneity of the system. The recent slope failure of the Kettleman Hills waste...
Mathematical Characterization of Fabric and Its Use in Mechanics of Geomaterials
Increased evidence of the influence of their discrete nature on the observed behavior of geomaterials has prompted a number of investigators to look at these materials at the microstructural...
Return to search