Shape Optimization of Joints of Steel-Framed Diaphragm Wall
Shape optimization system of the joints of the steel-framed diaphragm wall (abbreviated as steel diaphragm wall) is discussed. The optimization problem is formulated as the minimum cost...
Modeling of Plate and Shell Structures with
Finite element models for the analysis of plates and shells, based on the concept of hp-extension are presented. A methodology for the control and analysis of the error of the finite element...
Plates and Shells with Crack-Like Flaws
The formulation of new hierarchial finite elements for the analysis of laminated plates and shells in the presence of flaws are discussed. The performance of the elements is evaluated...
p-Version of FEM and Shape Optimal Design
This paper presents some research results obtained recently in using the p-version of the finite element method (FEM) for shape optimal design. It is shown that the p-version 2-D elastic...
Stress Computations for Nearly Incompressible Materials
Computation of stresses by the finite element method (FEM) in the case of nearly incompressible isotropic elastic materials is discussed. It is shown that for moderately high Poisson's...
Experience with the p-Version Program PROBE
The conventional approach in the FEM is known as the h-version, in which the solution accuracy depends on the size h of elements. The alternative approach is the p-version, in which the...
Buckling of Tapered Columns by P-Version of F.E.M.
The local, distortional, overall, and interactive buckling of tapered, thin-walled members under axial compression and flexure are considered by using three-dimensional models based on...
Superquadric Object Representation for Dynamics of Multi-Body Structures
While the finite element representation of an object in terms of nodal coordinates and shape functions is ideal for representing the stress and energy state, it is not well suited to the...
Discrete Optimization of 3D Steel Frames
The purpose of this paper is to report the results of the application of a general discrete optimization procedure to the design of a realistic, three-dimensional steel building frame....
Parallel Computation for Linear Programming
In this paper, the basic Simplex algorithm is reexamined. Computational steps which can be done in parallel are identified, and a parallel version of the Simplex method is implemented...
Sulfur Polymer Concrete for Special-Purpose Applications
Special-purpose sulfur concrete construction materials, based on sulfur polymer cement (SPC) and mineral aggregate, have been developed by the U.S. Bureau of Mines as part of a program...
Review of Composite Analysis Methods for High Temperature Applications
This paper addresses a number of unique problems encountered in the stress analysis of high temperature composite materials. The materials used as structures subjected to temperatures...
Fatigue Behavior of Steel Connection Angles
A method for predicting the fatigue behavior of flange angle elements is presented. The primary emphasis herein concerns an analytical approach for evaluating the fatigue life of flange...
Application of BEM to Two-Dimensional EPFM
This paper describes the authors' current and continuing research in application of the Boundary Element Method (BEM) to crack growth problems in Elastoplastic Fracture Mechanics...
Numerical Evaluation of Energy Release Rates
Numerical studies are described that evaluate the total energy release rate, GT, for quasi-static, Mode I cracks using two-dimensional finite-element...
Sprayed-On Polymer Mortar Construction
Sprayed-on polymer mortar has been used to construct low-cost, lightweight structures in a variety of locations. The addition of the two-component additive to one cubic yard of mortar...
Predicted Fatigue Life Behavior of Stay Cables
Monte Carlo simulation results are used to illustrate the relationship between the fatigue lives of short prestressing strand test specimens and long strand stay cables. Long stay cables...
Effect of High Frequency Response on Fatigue of Offshore Structures
Welded steel specimens have been tested under several loading spectra to determine the effect on fatigue life of high frequency components in the psd of the stress or strain in the joint....
Early Age Strength Detection for In-situ Concrete
In recent years it has become increasingly beneficial to know the quality of concrete as soon as possible after it has been placed. This is especially true for high-rise concrete buildings...
Development of Analytical Models for Reinforced Concrete
A computer program called WCOMR was developed to analyze the characteristics of RC walls subjected to reversed cyclic loading. The WCOMR comprises RC element idealization described by...
Return to search