Multi-Dimensional Modeling of Unsaturated Flow in the Vicinity of Exploratory Shafts and Fault Zones at Yucca Mountain, Nevada
Modeling studies were conducted to determine the potential effects of exploratory shafts on moisture distribution in the vicinity of an exploratory shaft facility, and the potential for...
Applications of Fracture-Flow Modeling to Site Characterization
This paper describes practical applications of discrete-fracture approaches for design and analysis of groundwater flow about high-level radioactive waste repositories. The paper presents...
Method for Determining the Fuel Contribution to the Source Term in Trasnport Casks
A comprehensive source term characterization methodology has been developed for the determination of the fuel contribution to the potentially releasable radioactivity in spent fuel shipping...
Fluid Line Deployment and Repair for Space Station
Deployment of the utility system for providing services to the NASA Space Station Freedom provides a unique challenge in design and material technology. The system must be lightweight,...
Post-MECO Propulsion System Requirements for Placement of an STS External Tank in Low Earth Orbit
This paper discusses the findings of a series of computer simulations carried out at the National Institute of Standards and Technology to investigate the requirements for powered flight...
Motion Control of Space Structures
A new area of civil engineering is emerging as we begin to establish a permanent presence in space. The new area of civil engineering is the motion control of space structures. This paper...
Effects of Initial Conditions on Large Space Structures
Effects of initial conditions of axial deformation (length) and attitude (pitch) angle have been investigated on the subsequent orbital motion, attitude (librational) motion, and axial...
Actively Controlled Optimum Structural Design
This paper deals with the investigation of the number and location of actuators and sensors on the optimum structure and control design of space structures. The optimization problem is...
Wave Propagation in Hyper-Structures
The concept of hyperelement was introduced by E. Kausel and J.M. Roesset, 1977 in connection with the derivation of the dynamic stiffness matrix for layered continuum problems involving...
The Truss-Beam and Space Technology
A method is presented herein to determine the dynamic characteristics of truss-beam systems for both planar and space structures. Results from this approach are compared with those of...
Dynamics of Composite Tubes
A displacement-based stiffness method is used to study the characteristics of dispersive wave propagation in laminated composite cylindrical tubes. It is assumed that the tube is composed...
Effect of Gravity on Dynamic Behavior of Beams
Large space structures will be needed to provide structural framework for maintaining relative positions of individual components of systems in low earth orbit. Particularly because of...
Conceptual Design for a Lunar-Base CELSS
Future human exploration is key to the United States National Space Policy goal of maintaining a world leadership position in space. In the past, spacecraft life support systems have used...
Fluid Behavior Considerations for Waste Management in Low-Gravity Environments
Design of waste recycling systems for spacecraft requires a knowledge of fluid behavior in microgravity. As gravity is reduced, phenomena usually ignored in the One-G environment of earth...
Design Considerations for a Ceramic Fabric Radiator
The design of an Advanced Ceramic Fabric (ACF) thermal management device for use in both interplanetary and near-earth space must consider several important aspects of the environment....
Upgrading Hydraulic Infrastructure for Level One Redundancy
In the current paper a methodology is presented for upgrading any single source water distribution system in order to provide a level one system redundancy at a minimum cost. A level one...
Soft Bottom Low Flow Channel?A New Approach
In 1987, the City of Boulder, Colorado requested assistance from the Urban Drainage and Flood Control District (District) to repair a problem of cattails growing in the low flow portion...
Utilization of Stormwater Runoff to Recharge Underlying Aquifer
Based on the available data and its proximity to the Capital area, Wadi Al Khawd was selected as the site of the first aquifer recharge project in Oman. The project was designed by Stanley...
Using an Index Stream to Make Instream Flow Decisions
The paper discusses development of an Integrated Operating Plan (IOP) that uses an unregulated (natural) stream in the upper Cedar basin as an index of overall hydrologic status of the...
Water Measurement and Accounting of Lake Michigan Diversion
The diversion of water from Lake Michigan and the Lake Michigan Basin into the Mississippi River Basin has been regulated since the turn of the century. The U.S. Supreme Court Decree of...
Return to search