Free surface flow modelling on a complex topography
The aim of this paper is to describe the different construction stages and the validation of a free surface flow model on a complex topography. This model is based on the two dimensional...
Flood Propagation on Mobile Beds under Mountainous Flow Conditions
An implicit finite-volume scheme is used to solve the shallow water equations under mountainous flow conditions. The algorithm is stable for sub- and supercritical flows and moving internal...
Reliability and Validity of Modeling Sedimentation and Debris Flow Hazards Over Initially Dry Areas
Extreme floods may inundate populated areas of a river valley that are normally dry. Two-dimensional flow analysis is a useful method for predicting the spatial and temporal behavior of...
A comparison between computed and measured bed evolution in a river bend
A shallow-water scheme with a movable bed has been employed in order to check the reliability of computations related to the bed evolution when a substantially three-dimensional phenomenon...
Using Drop Structures for Stream Gaging
A long term monitoring program of 15 watersheds, for the purpose of studying channel response to erosion control measures being constructed in north Mississippi, is being conducted by...
A Computerized Open Channel Flow Measurement Device
This is a technical information paper with the intention of introducing a new product. It is not the intent of the author to use this as a marketing tool. However, it is the intent to...
Velocity and Turbulence Measurement from the Illinois and Mississippi Rivers
This paper presents a data measurement program that was used for collecting the velocity data associated with barge-tow traffic on the Illinois and Mississippi Rivers and includes a discussion...
Velocity Measurements by the One-Orange Method
Application of the most sophisticated instrumentation - so called state-of-the-art equipment - is not always necessary nor even desirable for measurement of mean velocities in verticals,...
Sediment Measurement Instrumentation A Personal Perspective
The development of the suspended sediment samplers in the 1940s was a major contribution to the science of sedimentation and provided for the proper development of dams, reservoirs, and...
An Investigation of Turbulence in Open Channel Flow via Three-component Laser Doppler Anemometry
A three-component laser Doppler anemometer is used to reexamine the distribution of single-point mean statistics in a nearly uniform fully-developed 2D turbulent open channel flow of water...
Experimental Study on Turbulent Structures in Unsteady Open-channel Flows
Turbulence measurements in unsteady open-channel flows over smooth beds were conducted accurately by the simultaneous use of two-component LDA system and water-wave gauges. In the inner...
Void Fraction Measurement Techniques for Gas-Liquid Bubbly Flows in Closed Conduits; A Literature Review
This paper provides a review of void fraction measuring techniques for gas-liquid bubbly flows in closed conduits with emphasis on the suitability of these methods for air-water bubbly...
Recent Applications of Acoustic Doppler Current Profilers
A Broadband acoustic Doppler current profiler (BB-ADCP) is a new instrument being used by the U.S. Geological Survey (USGS) to measure stream discharge and velocities, and bathymetry....
Experimental Study on Unsteady Flow in Open Channels with Flood Plains
Hydraulic characteristics of unsteady flows were investigated experimentally in open channels with flood plains using a computer-controlled water supply system. Some noticeable features...
Coherent Structures in Compound Open-Channel Flows by Making Use of Particle-Tracking Visualization Technique
In this study, images of very small 100 ?m diameter particles uniformly suspended in compound open-channel flows were recorded on an optic disc using a high-sensitive CCD camera and 2W...
Testing Turbine Aeration for Dissolved Oxygen Enhancement
During August of 1993 the Bureau of Reclamation tested turbine aeration for dissolved oxygen (DO) enhancement at Deer Creek Powerplant near Provo, Utah. This test required a variety of...
Eliminating Water Column Separation and Limiting Backspin at a 12,000-Horsepower Pumping Plant
Milwaukee's Water Pollution Abatement Program includes a deep tunnel system which collects combined sewage and street runoff during storms for later treatment when capacity is available...
Pressure-Time Flow Rate in Low Head Hydro Plants
Very few methods are accepted for measuring the flow in the large intakes typical of low head, run-of-the-river hydro plants. These intakes are characteristically short, non-uniform, non-prismatic,...
Model-Prototype Conformance of a Submerged Vortex in the Intake of a Vertical Turbine Pump
Submerged vortices are commonly found in sump intakes of vertical turbine pumps. These vortices are known to cause increased vibration and at times degrade pump performance. Approach flow...
Observations on the Growth of an Internal Boundary Layer with a Lidar Technique
The distribution of atmospheric water vapor across a step change in surface humidity (dry-wet) was observed by a Lidar measurement technique under neutral atmospheric stability condition....
Return to search