Seismic Strengthening of Existing RC Buildings
Seismic strengthening of existing reinforced concrete (RC) frame buildings by the use of steel braces or panels was studied experimentally. A special joint between steel elements and the...
Binding and Bonding Concrete to Composite Columns
Composite interaction between concrete encasement and structural steel shapes is limited unless lateral ties and/or mechanical attachments insure such interaction until desired strength...
New Ways with Concrete
When NASA builds on the moon and in space, the structures will be concrete, say researchers at the Portland Cement Association's Construction Technology Laboratories. They...
New Pavement from Old Concrete
Recycling portland cement concrete has gained momentum as an alternative to resurfacing aging highway and airfield pavements. Recycling cuts down rawmaterial requirements, reduces the...
On-Site Containment of PCB-Contaminated Soils
A remedial investigation/design project, with subsequent post-closure monitoring, was conducted for upland areas containing PCBs at an industrial site in New Bedford, Massachusetts. A...
Issues in Dam Grouting
Although perhaps the largest number of individual grouting projects do not involve dams, by far the largest volume of grout used is for grouting of new or existing dams. This volume presents...
Roller Compacted Concrete
Roller compacted concrete has emerged recently as an economical material and rapid method of construction for use in gravity dams, overflow structures and heavy duty pavements. The economics...
Hydropower
Recent Developments
The Foothills Project has been under consideration by the Denver Board of Water Commissions for many years. It is one of the major steps in the continued efforts of the Board to provide...
Shrimp Farm Made Feasible
Engineers on a limited budget developed a facility on the island of Oahu, Hawaii, where Mexican blue shrimp are being raised commercially. A series of U shaped sections were laid parallel...
Clay Pipe Installation?Advances in Load Factors
This report presents an evaluation of traditional load factor values for clay pipe and the development of a new bedding system which gives a higher load factor. Tests demonstrate that...
Failure of a Large Reinforced Concrete Pipeline
This paper describes the damage that occurred when a landslide overloaded an 11 ft diameter reinforced concrete pipeline. The 8 ft lengths of pipe, each of 11. 5-in. wall thickness, were...
SPIDA: An Analysis and Design System for Buried Concrete Pipe
The paper presents a description of a new computerized direct design method for buried concrete pipe named SPIDA (Soil-Pipe Interaction Design and Analysis). Also the technical basis and...
Experiences in Concrete Pipeline Construction in Ontario 158-1985
The paper discusses the title subject in terms of concrete pipe fabrication methods and plants, pipe jointing and jointing materials, and construction experiences in the Province of Ontario,...
Field Burial Tests of Corrugated Double Wall PVC Pipe
A new lightweight PVC pipe, consisting of a smooth inner wall and a corrugated outer wall, has been introduced in the U. S. sanitary sewer market in 4 through 10 in. diameters. Field burial...
Proportioning Reinforcement for Buried Concrete Pipe
The proportioning of reinforcement between inner and outer cages that is specified in ASTM Standard Specification C76 for concrete pipe in sewer and culvert applications is examined in...
Influence of Frost Action on the Load Exerted on Buried Pipe
When work was started on revising the Swedish code for concrete pipes at the end of the 70's, a research project was carried out to evaluate the risk of increased load due...
Planned Overtopping of Embankments Using Roller Compacted Concrete
Three recent projects are discussed where the economy and versatility of roller compacted concrete (RCC) were utilized to allow flood water overtopping of small to medium size embankment...
Brazil's Innovation in APM Technology
The paper discusses an automated people mover (APM) called an Aeromovel which consists of pneumatically-controlled vehicles weighing less than 20,000 pounds with a capacity of 300 passengers....
Design and Fabrication of the Guideway Superstructure for the Miami METROMOVER
The guideways for the driverless rubber-tired vehicles are entirely aerial. As a result of severe restrictions on horizontal alignment and pier locations imposed by the downtown Miami...
Design and Construction of Guideway: Vancouver Advanced Light Rapid Transit
The Vancouver Advanced Light Rapid Transit (ALRT), system consists of linear induction motor driven, light-weight cars automatically controlled operating over a 21. 4 km system from downtown...
Return to search