A Revised Methodology to Minimize Bias in Determining the Porosity and Void Tensor of Particulate Media
Increased recognition of the importance of fabric in the observed response of particulate media under monotonic and cyclic loading has led to the development of new procedures to quantify...
Digital Image Techniques for Volume Change Measurements in Triaxial Tests
This paper presents an innovative technique that has been used for measuring the volumetric deformation that cylindrical specimens experience during the shearing stages of a triaxial test....
A New Three-Dimensional Modeling Technique for Studying Porous Media
A new three-dimensional technique for modeling the micro-structure of porous media is proposed. On the basis of measurements of characteristics made using thin sections of porous media...
Image Analysis for Interparticle Contact Modeling
Two dimensional photoelastic elements (disks or ellipses) are used as models for studying granular material behavior. The required observations include accurate continuous measurements...
Image Enhancement: Application to Geotomography
Image enhancement complements geotomographic reconstruction in the rendering of better images. In this paper, available image enhancement techniques are reviewed. Emphasis is given to...
Displacements in the Soil Near a Tunnel Face Using Centrifuge Tests and Image Processing
Image processing is applied to measurements of the soil for a tunnel model in centrifuge. For this aim a specifical device has been developed on the LCPC centrifuge (Nantes, France) and...
Image Analysis Applied to Geotechnical Engineering
Application of scanning electron microscope and image analyzer to the quantification of grain morphology and microfabric of aged sands is briefly reviewed. Relationships of morphology...
Reliability-Based Analysis and Design of Flexible Airfield Pavements
This paper illustrates, a new reliability-based procedure to analyze existing pavements and design new pavements that is being developed by the U.S. Air Force. The procedure uses a rigorous...
Airfield Pavement Structural Evaluations, Current Practice and Future Needs
The United States Air Force's pavement evaluation teams have to be able to go quickly anywhere in the world to evaluate an airfield pavement's structural capability. A combination of non-destructive...
A Novel Approach to Develop a Performance Based Test for Rutting of Asphalt Concrete
Asphalt concrete consists of compacted granular aggregates mixed with viscoelastic asphalt cement. The predictive phenomenological models had limited success in explaining the origin and...
Durability of Asphalt Mixture
Five asphalts were used in a laboratory testing program to establish a relationship between mixture properties and the binder properties. These five asphalts were used to make Florida...
Resin Modified Pavement in Airfield Applications
The resin modified pavement (RMP) is a composite paving material that combines the flexible characteristics of an asphalt concrete (AC) material with the durability of a portland cement...
Portland Cement Concrete Apron Pavement Design Study for King Fahd International Airport in Saudi Arabia
The Federal Aviation Administration (FAA) Advisory Circular 150/5320-6C used for design of portland cement concrete (PCC) pavements for airports does not account for the site-specific...
Evaluation of a Large Aggregate Asphaltic Layer in an Airside Pavement
A new analytical method of designing large aggregate asphalt mixes (LAM) was used to design a thick asphalt base layer for an aircraft taxiway. The results of an analysis on the material...
Recycling Concrete and Asphalt Pavements Rehabilitation of Runway 18R-36L Orlando International Airport
The subject project consisted of reconstructing an air carrier runway utilizing a concrete keel section with asphalt overlays along the runway edges. Associated taxiways were rehabilitated...
Evaluation of Elastic Layered Theory for Airfield Pavements, Using Nondestructive Testing and In-Place Response Measurements
Airfield pavement deflections measured under actual aircraft loads were compared to predictions based upon elastic layer theory and moduli backcalculated from failing weight deflectometer...
Quality Control: Bridge Steel Fabrication and Erection
This paper examines the Quality Control Program Plan (QCPP) developed by Frederic R. Harris, Inc. (FRH) for fabrication and erection inspection of over 5,448,000 kg of AASHTO Fracture...
Pacific Rim TransTech Conference?Volume II
International Ties, Management Systems, Propulsion Technology, Strategic Highway Research Program
This proceedings,
Pipeline Infrastructure II
This proceedings,
Trenchless Track Record
Ottawa is a leading user of trenchless technology for sewer rehabilitation projects. The municipality has nearly a decade's worth of experience with at least nine different...
Return to search