Seismically Safe, Spectator-Friendly
As 50,000 frightened spectators at Candlestick Park can attest, the Loma Prieta earthquake in 1989 provided chilling evidence of the importance of seismic design in public structures....

Peaches and Concrete
One Peachtree Center, Atlanta's latest highrise tower, will measure 62 stories high (860 ft) with 1.42 million sq ft of office space when completed next July. It will also...

Landfills: Anatomy of Automated Design
California's 360 acre Bee Canyon landfill (completed last year) sits amid a complicated network of narrow canyons with side slopes 300 ft high. As with most landfill projects,...

The Roads Ahead
In 1990, 37 states spent almost $50 million on highway pavement crack sealing, according to researchers at the Strategic Highway Research Program (SHRP). In the near future, a robotic...

On the Influence of Seismically Induced Residual Forces on Bridge Abutment Design
The seismic design of bridge abutments depend on the anticipated movement of the abutment during the design earthquake. For seat-type abutments in which the backfill resistance can be...

Analytical Studies on the Seismic Response of Lead Rubber Base Isolated Bridges
Highlights of a study related to the response of base isolated bridges are presented. Four different analytical models are developed and used to evaluate the response of base isolated...

Dynamic Analysis of Sliding Seismic Isolators
The friction pendulum system (FPS) sliding seismic isolators are being used for the seismic isolation rehabilitation of the U.S. Court of Appeals Building, San Fransisco. This paper will...

A Wax-Coupled Borehole Seismic Detector for High-Resolution Measurements
A triaxial borehole seismic detector was developed for high-resolution measurements at frequencies up to 2,000 Hz. Applications for this detector include three-component shallow reverse...

Sensitivity of Lifeline Response to Models for the Spatial Incoherence of the Seismic Ground Motions
The sensitivity of the response of above-ground and buried lifelines to different models describing the spatial variability of the seismic ground motions is examined. It is shown that...

Shear Resistance Models for Concrete Bridges
Statistical models are developed for the shear resistance of concrete bridge girders. Two structural types are considered: reinforced concrete T-beams and prestressed concrete AASHTO girders....

A New NDT Device for Comprehensive Pavement Maintenance (Theoretical Aspects)
A new nondestructive testing (NDT) device is being developed to detect some precursors to pavement distress. The principle of operation of the device is based upon the generation and detection...

A Multiple Disk Centrifugal Pump as an Artifical Ventricle
A pulsatile, multiple disk, centrifugal pump has been analysed and tested for potential use as an artificial ventricle. The pump is similar to a Tesla Turbine design which consists of...

Locally Buckled Plastic Hinge Behavior Under Monotonic and Cyclic Loading Condition
In order to clarify the influences of local buckling under monotonic and cyclic loading conditions, experimental studies were carried out on W8x10 A-36 structural steel members subjected...

Design Codes for Lunar Structures
The American Institute of Steel Construction (AISC) Manual of Steel Construction is a codification for the design and construction of steel structures. It includes information, some tabular...

Design Concepts for a Lunar Concrete Production Facility
This paper discusses concrete production fundamentals on the earth and identifies applicable features required for lunar concrete production. Production principles unique to the lunar...

An Analysis of an Inflatable Module for Planetary Surfaces
Design and construction of a structure on planetary surfaces requires addressing a host of issues not encountered on Earth. A modular quilted inflatable structure consisting of thin membranes...

Conceptual Design of Modules for a Lunar Base
This paper describes the development of cubically shaped aluminum modules which could be variously arranged to form living and working quarters for a lunar base. The module components...

Prototype Lunar Base Construction Using Indigenous Materials
A lunar base must be designed to withstand harsh lunar conditions, which include severe internal pressure loads and a high radiation level. Yet to provide for economical and rapid future...

Hedratecture in Severe Climates
There are still vast areas of the world that are almost untouched by human activity. There is need to make access to these regions with special new structures and there is also a need...

Lunar Habitats?Places for People
As part of President George Bush's Space Exploration Initiative, lunar bases or habitats are envisioned for long-term habitation by humans. This paper presents factors that should be considered...

 

 

 

 

Return to search