Cleaning Up: The Second Decade
Endless media coverage and a high level of public anxiety make it seem as though the U.S. has been attempting to clean toxic waste sites for decades. In fact, the 1980s were our first...
A Possible Paradigm
`We work only on a lump sum basis, with work guaranteed on time, and no extras. We help you define the scope of work, using our experience and unmatched computerized databases, then guarantee...
Remediation Technologies in Use for Groundwater and Soil Contamination in the Santa Clara Valley
Silicon Valley is known as the origin and the heart of the high technology (Hitech) industry. However, tech-nologies used for soils and groundwater remediation in the valley are not necessarily...
Leveling the Playing Field
As professional sports grow, so does the market for elaborate multi-use sports arenas. The new Target Center in Minneapolis features a unique movable floor, 68 luxury suites and a state-of-the-art...
Building Moon Bases
It is widely accepted that the U.S. will begin to build a base on the moon at the turn of the century, and much of the design work has already been done. Based on papers presented at Space...
Diatomaceous Soils: A New Approach
Diatomaceous soils are formed over long periods of time when the skeletal remains of plankton and other single-celled marine creatures sink and accumulate in lakes, estuaries and oceans....
Fabric Meets Cable
The newest generation of fabric-roofed stadiums are cable domes designed by David H. Geiger of Geiger Gossen Hamilton Liao Engineers, New York City. He also uses the term tensegrity coined...
High Tech on Campus
Hannan Hall, the new laboratory building at The Catholic University of America, has a structure entirely made up of precast concrete panels and 24 in. deep double tees. The loadbearing...
Local Buckling Behavior of Plate Elements
In the elastic post-local buckling range, the stress distribution across the width of compression elements of light gauge steel shapes is nonlinear. For code implementations, these stress...
The Design of Diagonal Cross-Bracing
The results of an analytical and experimental study on the behavior of simple and double diagonal cross-bracings in vertical stiffening trusses and in built-up open web beams are presented...
Manipulation of Shell and Fabric Structure Form
Fabric structures and concrete shells are readily compared because of their curving shapes and the apparent structural derivation of their forms. Every fabric structure includes compression...
High Strength Concrete: Proportioning, Behavior and Applications
Generally, concrete with a cylinder compressive strength higher than 6000 psi (41.4 MPa) is designated as high strength concrete. High strengths are achieved using stronger coarse aggregates,...
High Molecular Weight Methacrylate for Sealing Cracked Concrete
The sealing of cracks in concrete surfaces has been one of the most difficult types of repair to accomplish. Epoxy injection has been widely used, but due to its relatively high cost,...
Use of Copper Slag for Construction Purposes
Standard laboratory test results on the fine- and coarse-grained fractions of a copper slag have been presented. Based on the results of these tests, the possible use of the fine fraction...
Sprayed-On Polymer Mortar Construction
Sprayed-on polymer mortar has been used to construct low-cost, lightweight structures in a variety of locations. The addition of the two-component additive to one cubic yard of mortar...
Concrete Strength-Quality Assurance
The usual criterion for establishing grades of structural concrete is the compressive strength measured in an arbitrary manner on a standardized specimen stored in a stipulated fashion...
Lessons Learned in Laboratory and Field Evaluation of Accelerated Strength Tests for Quality Control of Concrete Pavements
This paper describes the results of an accelerated strength testing program performed to evaluate flexural strength potential at 28- and 90-days. Based upon a literature review of previous...
Compressive Deterioration of Cracked Concrete
When shear behavior of reinforced concrete (R/C) members is to be simulated, the compressive strength and the stiffness reduction of cracked concrete must be taken into consideration....
Ultimate Strength and Deformation of RC Panels
In this study, twenty reinforced concrete panels have been tested under pure shear. Test results showed that the compressive strength of concrete strut was strongly affected by bond characteristics...
Parametric Analyses of RC Shear Walls by FEM
In this paper, nonlinear behavior of reinforced concrete shear walls is studied by using the finite element analysis. We applied numerical analyses to a wide range of parameters, such...
Return to search