Wind Induced Circulation in Shallow Lakes
Clear Lake is a relatively shallow lake in Northern California. Natural flows are small but at times they do transport heavy metals into the lake. In order to predict water quality constituent...
Prediction of Filtrate Turbidity by Parameter Estimation
In order to operate the rapid sand filter in response to the time variation of effluent quality, a model and a procedure to predict the filtrate quality of rapid sand filters have been...
Limitations of Reduced Scale Testing on Parshall Flumes
A model for the boundary layer development in the entrance section of a Parshall flume is developed to account for the effects of fluid viscosity on flume calibration equations. Data for...
A Simple and Reliable Method For Analysis of Water Supply Distribution
The proposed analysis, may be regarded as a bridge between the practical sample analysis and the optimization model development. From the analysis and observation of water distribution...
Hydraulic Modeling of High Unit Discharge Energy Dissipators
The incorporation of an efficient and economical energy dissipation device is critical with respect to the safe operation of a high unit discharge spillway. The development and design...
Model Study of Center Hill Fuse Plug Spillway
Model tests of a fuseplug spillway mounted on the fixed crest of an embankment dam were conducted to develop a satisfactory design that would fail in a orderly fashion at a prescribed...
Predicting Critical Scour Stage at Bridges
After an initial level I screening process, most level II bridge scour studies result in recommendations for costly scour countermeasures. Typically, existing transportation budgets cannot...
Applicability of Two Simplified Flood Routing Methods: Level-Pool and Muskingum-Cunge
Simplified flood routing models for unsteady flow simulation in reservoirs and rivers have advantages of relatively small computing requirements when compared to dynamic routing models...
Selection of ?x and ?t Computational Steps for Four-Point Implicit Nonlinear Dynamic Routing Models
A major step in a successful application of unsteady flow models based on the numerical (four-point implicit, nonlinear finite-difference) solution of the complete one -dimensional Saint-Venant...
Advanced HEC-2 Modeling on Forester Creek
The goal of this paper is to share information regarding advanced modelling techniques used to solve complex hydraulic flow issues using the HEC-2 Computer Model (1990). There are several...
Modeling Critical Depth in Open Channels
This paper explores multiple critical depths. Reasons behind and characteristics of their occurrence are reviewed. A method to determine multiple critical depths is proposed for use in...
A Numerical Model for Learning Concepts of Streamflow Simulation
Numerical models are useful for demonstrating principles of open-channel flow. Such models can allow experimentation with cause-and-effect relations, testing concepts of physics and numerical...
Comparisons Between Experimental and Numerical Studies on Laminar Flow with Tracer Transport
In this paper we present an experimental and an accompanying numerical study of two- and three dimensional transient flow and tracer transport in complex flow systems at low Reynolds numbers....
Comparison of Advective Transport Algorithms with an Application in Suisun Bay, a Sub-Embayment of San Francisco Bay, California
This paper examines the conservative properties of several numerical treatments of the salt conservation equation. Specifically, computationally efficient first and second order Eulerian-Lagrangian...
Gully Intrusion on Reclaimed Disposal Sites
A three-phase gully erosion study was initiated at the Engineering Research Center of Colorado State University, in cooperation with the U.S. Nuclear Regulatory Commission. The objective...
Distorted Physical Models for Mixing Studies
The frictional resistance and mixing process affected by roughness bars are investigated. Specific combinations of the size and layout of the bars for various flow conditions are suggested...
Determination of Pulsating Pressures for Baldhill Dam, N.D. Spillway
Model tests of the existing Baldhill Spillway were conducted with symmetrical and asymmetrical gate openings to determine for various flow conditions the characteristics of the hydraulic...
Hydraulic Model Studies of Y-Branch
Hydraulic model studies were made for the Y-branch steel penstock located in a vertical bend. The model tests were performed for various modes of pumping and generating operation. The...
Model Study of Rio Hondo Flood Control Channel, Los Angeles, California
The Rio Hondo Flood Control Channel located within the Los Angeles County Drainage Area (LACDA) is part of a Comprehensive flood control system which includes 20 dams, 129 debris basins,...
Bridge-Scour Analysis Using the
A program was developed to extract hydraulic information required for bridge-scour computations, from the Water-Surface Profile computation model (WSPRO). The program is written in compiled...
Return to search