Converted Wave Energy Transmission, Storage and Integration
Results of a number of full-scale studies of transmission, storage and integration of electricity resulting from wave energy conversion are discussed. These studies involved the floating...
Preliminary Design and Construction Plan for an Ocean Wave Energy Conversion System
A preliminary design and construction plan for a prototype wave energy conversion system is described. While the design methodology and construction procedures are intended for generic...
Economic factors of Wave Energy Conversion
The paper provides some insights into the institutional setting in which power marketing is conducted (in the United States). It presents some approaches to economic evaluation that might...
Wave Energy Research in Ireland
Measurements taken at several locations off the Irish coast show that the average power intensity available to Ireland well exceeds 20 kW/m. Several projects have been undertaken in an...
On the Performance of a Wave Power Converter
This paper presents the KN-principle for wave - power conversion. The principle and components of the wave power converter are described and some practical relations are presented in order...
Optimal Strategies for Phase Control of Wave Energy Devices
Phase control has previously been proposed for increasing energy output from wave power devices, and latching strategies have been tested for point absorbers and for pneumatic devices....
Evaluation of Sediment Transport and Friction Factor Equations Using MOBED
Three sediment transport rate equations and the same number of friction factor equations for mobile boundary channel flows were evaluated using a mobile boundary flow model called MOBED....
Selected Papers from the Chinese Journal of Geotechnical Engineering ?1985
This book contains English translations of 19 articles selected from the Chinese
Utilization of Ocean Waves?Wave to Energy Conversion
This collection of papers reviews both the state of the art in pneumatic wave energy conversion and the associated peripheral technologies, such as capture chamber research and design,...
Ocean Energy: Can It Compete?
Electric power plants using ocean energy are technically viable, but they tend to be cost-prohibitive. A study commissioned by the Electric Power Research Institute and carried out by...
Uncertainty Analysis of Field Turbine Performance Measurements
This paper presents comprehensive uncertainty analyses of two different flow measurement methods for field tests on turbines. The 'water to wire' efficiency was...
Laser-2-Focus Flow Measurements in the Runner of a Bulb Turbine and Comparison with Calculation
Flow measurements are presented, which were carried out near and inside the 4-blade runner of an axial model bulb turbine of double adjustable type. These measurements were performed by...
Hydraulic Machines Model Acceptance Tests
The article begins with a description of the modern test installations, giving the dimensions of the models most frequently used and the head heights. Attention is then given to the most...
Thermal Monitoring of Leakage Through Dams
The technique involves very accurate temperature measurement at shallow depth below the reach of the surface diurnal cycle. Temperatures respond to subsurface water movement (with advective...
Negotiating Environmental Protection Measures with Resource Agencies: Twin Falls and Weeks Falls Hydroelectric Projects, Washington
The planning and licensing process for the Twin and Weeks Falls Projects involved resolution of numerous regulatory and environmental issues, including the need for cumulative impact analysis...
Simulation of the Pit 3, 4 and 5 Hydroelectric Project Using the USFWS Instream Temperature Model
The Pit River in Shasta County, California, is the site of the Pit 3, 4, and 5 Project (Project). A two-year Bald Eagle and Fish Study was initiated in March 1983. As part of the overall...
Artificial Ice Islands for Deep Water and Production Structures
The need for an island to survive the summer melt season is introduced. To account for surface melting and erosion from waves and currents during this season, the island's...
Design and Monitoring of an Ice Drill Pad
An ice pad was sucessfully designed and built to provide a suitable foundation for an exploratory drill rig in the National Petroleum Reserve of Alaska in early 1985. Design considerations...
Development of a Self-Heating Thermal Probe for Saline Permafrost
Geothermal modelling and prototype testing are described to support the development of a self-heating thermal probe. This has application for in-situ determination of the amount of unfrozen...
Installation of Thermistor Strings in Test Borings: A Comparison of Methods and Results
Several test borings were instrumented with two thermistor strings, one inside and one outside an air-filled PVC casing to compare readings of both thermistor strings and the stability...
Return to search