Axial Capacity of Pressure-Injected Piles: A Cavity Expansion Model
The application of cavity expansion theory to the development of a mathematical model for predicting the ultimate axial capacity of pressure-injected piles in cohesionless soils is presented....

Response of Concrete Island Drilling System to Ice Impact Loading
The lateral stability and load/deformation characteristics of the Concrete Island Drilling System structure under ice impact loading conditions were studied. The 300-foot-square (91.5-meter...

The Role of Analytical Geomechanics in Foundation Engineering
The role of modern geotechnical analysis in foundation design is reviewed, and analysis methods are classified into three categories, depending on their level of sophistication. The benefits...

Innovative Foundation Designs for Permafrost Conditions in the Arctic
This paper describes the engineering solution to restore the structural properties of permafrost at a site location in the Western Operating Area of the Prudhoe Bay Field. Steel pile supports...

Guide for Evaluating Engineering Software
This is a practical guide to the problem of assessing the suitability of computer software being considered for use in engineering analysis, design or decision making. Each chapter treats...

Structural Design, Analysis and Testing
This volume contains the papers presented in 21 sessions of the 1989 Structures Congress held in San Francisco. The papers cover a wide range of topics including types of construction...

Loss of Carrying Capacity in Pipes?Transporting Softened Water with High pH
The increase in pipe roughness and loss in carrying capacity for water mains carrying high pH water is documented with over 20 field tests conducted in Austin, Texas. The data show that...

Continuous Sampling of Nonpoint Source Pollution
Sediment, nutrient, and other pollutant loads from storm water runoff in a small Texas watershed have been estimated using an initial strategy of periodic grab sampling and a revised strategy...

Nonpoint Source Loads and Phosphorus Budget for Lake LBJ
Nonpoint source loadings from stormwater runoff are a major contributor of pollutant loadings in many locations. A phosphorus budget is developed for Lake Lyndon B. Johnson (LBJ). Lake...

Groundwater Loadings of Pesticides From Chemigation: A Gleams Model Simulation
This paper describes how, with slight modifications, the GLEAMS model (Groundwater Loading Effects of Agricultural Management Systems) was used to represent chemigation for herbicides,...

The Water Erosion Prediction Project: Erosion Processes
The erosion process on hillslopes is conceptualized in the USDA Water Erosion Prediction Project (WEPP) as being divided into rill and interrill processes. Rill detachment occurs when...

Total Sediment Transport and Its Physical and Mathematical Modeling
Some main results in the field of sediment transport theories obtained by the author are presented. Based on these theories, the methods of physical and mathematical modeling for total...

Advances in Computational Mobile-Bed Hydraulics
A new conceptual approach to one-dimensional mobile-bed simulation is briefly described, along with two demonstrative examples. The approach is based on fully coupled solution of the unsteady...

Bed Waves Generated by Internal Waves in Alluvial Channels
The flow in an alluvial channel is conceived as a stratified flow both with respect to the velocity- and density-distribution. In such flows internal waves may occur which influence the...

Comparison of n Values in Natural and Dredged Channels
Manning's n values were determined for three stream channels in two complex watersheds in North Mississippi. The study covered a wide range of channel conditions and flow...

Modelling Changes in Coastal Morphology
A description is given of a newly-developed coastal sediment transport model. Features of the model are the inclusion of cross-shore transport and non-potential suspended load, the latter...

A Continuum Mechanics Approach to Loose-Bed Motion
A mathematical model is presented for simulation of loose-bed motion. The physical system is separated into two regions, a bottom region and an upper region. The bottom region is representative...

Instability of Bed-Surface Composition Due to Sorting Process in a Stream Composed of Sand and Gravel
Wavy patterns of sorting are often observed in a stream composed of sand and gravel, and they are regarded as instability of bed-surface composition due to selective bed-load transport...

Highly Concentrated Sediment Loads of the Yellow River
A set of high concentration data for the Yellow River in China is examined and compared with low concentration data and laboratory experimental results....

Convolution-Integral Modeling of Non-Equilibrium Sediment Transport
In transient process of sediment transport due to unsteady or/and nonuniform flow or discontinuity of boundary condition, non-equilibrium process appears and it sometimes plays an important...

 

 

 

 

Return to search