Jet Grouting: New Directions
This article looks at jet grouting in soft soils, especially applications involving pre-installed structural supports for cut and cover excavations. The author offers a question and answer...
Express Design
Milwaukee's high-stakes effort to win its share of the lucrative convention market hinges on its new Midwest Express Center, a 670,000-sq-ft exhibition and convention complex....
Launched Bridges
Long-Term Effects of Suspended Solids Loads on Constructed Wetland Performance
Discussion session summary....
Sustainability Criteria for Water Resource Systems
This committee report,
Sky High
The increasing demand for personal communication services (PCS), such as digital cell phones and pagers, as well as digital television (DTV), has created new challenges for creating and...
The Invisible Infrastructure
Most developed countries have 50- to 100-year-old underground utility systems that carry far greater loads than their designs. They're difficult to repair or replace, yet...
Shake, Rattle and Hold (Available in Structural Engineering Special Issue Only)
In-situ lateral load tests of two bridge bents were conducted on Interstate 15 in Salt Lake City, Utah, to determine the strength and ductility of an existing concrete bridge and the improvements...
A Sure Ride
Are current quality assurance practices resulting in the degree of highway quality that is desired and expected? The resounding no that often answers this question has brought the concern...
On Solid Ground (Available only in the Geoenvironmental Special Issue)
On four transportation projects in Portland, Ore., soil nails and micropiles are used as alternatives to conventional earth-retention and foundation systems. The use of soil nails and...
Seismic and Dynamic Analysis and Design Considerations for High Level Nuclear Waste Repositories
This committee report was created to fulfill two primary objectives: 1) to provide guidance for assessing and defining the dynamic loads that must be considered in the design of a repository...
Channel Stability Assessment for Flood Control Projects
This manual provides assistance for determining potential channel instability and sedimentation effects in flood control projects. It is intended to facilitate consideration of the type...
Mapping with a Differential
A southern New Jersey landfill is using Differential Global Positioning System topographic surveying to cut costs and turnaround time on annual mapping and volume certification. Modern...
Building Tension in Buffalo
The National Hockey League's Buffalo Sabres have a new home, topped with an unusual tension-braced domed roof. An ingenious combination of dome designs, the Marine Midland...
ETA:1999
To convert the Bergstrom Air Force Base into the Austin-Bergstrom International Airport, planners needed to overcome various technical, social, political and environmental issues. To coordinate...
Design of Hydraulic Steel Structures
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 22 This manual prescribes guidance for designing hydraulic...
New Uses for Old Bridges
As historic bridges age, they are often rendered useless by modern load requirements and codes. Many had been abandoned or demolished. In 1991, however, the ISTEA created new provisions...
Stabilizing the Stacks
Spenser White and Prentis designed a hybrid soil nailing system to ensure that a historic library on the Bryn Mawr, Pennsylvania, campus would not be damaged during adjacent construction...
Wind Endurance
Although property casualty insurance companies are interested in a building's resistance to intense winds, risk underwriters traditionally take into account few, if any, wind-performance...
Guide to the Use of the Wind Load Provisions of ASCE 7-95
The objective of the Guide to the Use of the Wind Load Provisions of ASCE 7-95 is to provide guidance in the use of the wind load provisions set forth in ASCE Standard 7-95. The Guide...
Return to search